|
Author
|
Topic: 71-73 Mustang parts for sale
|
85Stangs
Journeyman Posts: 21
From: North Carolina
Registered: Jul 2004
|
posted 01-31-2005 09:07 PM
   
I have many 71-73 Mustang and Cougar parts for sale. I have a nice set of ginger deluxe door panels, Ginger Mach-1 sport buckets,consoles,rim blow wheels,AM/FM radios,4 speed parts including some NOS parts. Shifters,T handles,linkage,Z-bars,pedals,bellhousings,flywheels,forks. Also some N case rear ends,3.50,3.91 31 spline and also a set of 31 spline axles.
IP: Logged |
HHStang
Gearhead Posts: 332
From: SC, USA
Registered: Feb 2003
|
posted 02-13-2005 09:39 PM
where in NC are you? Do you have any (71-73) stuff? Engine/frame mounts 429, Mach grille & lights, rear honeycomb, Mach factory tach, fronts discs, brake booster& master, 9 inch rear, 351 or 429 driveshaft & front spoiler.------------------
------------------------
1967 472 Prost D1X FBstang
1972 429 Convertible
1997 Cobra vert S Trim
2004 F150 4x4 Crew FX4
www.mikemustangs.net
IP: Logged |
68 Coop
Gearhead Posts: 617
From: Mesquite, NV.
Registered: Oct 2004
|
posted 02-14-2005 04:42 AM
I'm kinda somewhat of a dummy on a lot of this stuff, but are the N cases' 9"??? I've been looking for some 3.50's, but I have an 8" rear. If I can use them, quote me a price, and I'll do my best to get them if possible. Just curious about what shipping will cost all the way to NV.------------------
William
I'm too busy workin', to get rich. 68 Coupe
Stock 289
Edelbrock 600/RPM Intake
Pertronix Ignitor/Flamethrower Coil
Doug Thorley Headers with Cherry Bomb's
C4
2.79's out back(for now)
15"x7" AR ASTRO's(needin' new 225 60's) "Project Under Construction"
IP: Logged |
steves cj
Journeyman Posts: 72
From: Darien, IL
Registered: Apr 2004
|
posted 02-14-2005 04:44 PM
Im doing a 4spd conversion on my 72 mach 1 and need the z bar eng & frame side bracket bolts, spring ect... also can u tell me exactly where the eng side z bar bracket bolts up. I can only find one bolt hole at the bottom on the left side of the eng. Steve
IP: Logged |
85Stangs
Journeyman Posts: 21
From: North Carolina
Registered: Jul 2004
|
posted 02-14-2005 05:18 PM
All N case rears are 9 inch cases. There are some 8 inch cases with extra ribbing for strength. I have an 8 inch posi with the stronger case if your interested.
IP: Logged |
85Stangs
Journeyman Posts: 21
From: North Carolina
Registered: Jul 2004
|
posted 02-14-2005 05:20 PM
Steve,
On the drivers side the Z-bar bracket bolts up on the inside of the frame rail. Not on the top like 65-70 cars.[This message has been edited by 85Stangs (edited 02-14-2005).]
IP: Logged |
68 Coop
Gearhead Posts: 617
From: Mesquite, NV.
Registered: Oct 2004
|
posted 02-14-2005 06:07 PM
I am VERY, but I'm just wondering if the shipping will make it unreachable???------------------
William
I'm too busy workin', to get rich. 68 Coupe
Stock 289
Edelbrock 600/RPM Intake
Pertronix Ignitor/Flamethrower Coil
Doug Thorley Headers with Cherry Bomb's
C4
2.79's out back(for now)
15"x7" AR ASTRO's(needin' new 225 60's) "Project Under Construction"
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
