|
Author
|
Topic: Wanted: 67-68 mustang fiberglass hood
|
Rustang
Gearhead Posts: 709
From: Clarion PA
Registered: Nov 2000
|
posted 01-26-2005 08:53 AM
   
Prefer flat hood but will consider any style.thanks
rustang ------------------
'68 mustang 351 clevor- 10.92@124
'67 Stang, 351W -11.18@118
'69 351C Torino-14.90@100
'78 Pickup 351W-15.56@88
'79 Pickup 460 ET=??
IP: Logged |
Tom G
Gearhead Posts: 561
From: Bethlehem, Pa USA
Registered: Nov 2001
|
posted 01-26-2005 09:31 AM
Quality Fiberglass here in the Lehigh Valley makes both the 67 and 68 shelby long and short hoods. I have seen these hoods and have a short one and they fit very nicely. I can get you the PH# for them and see if you can buy one locally as shipping would be alot, even to the Pittsburgh area becuase they truck freight the hoods. Tony Branda sells their hoods also. but you would be paying their markup. You can recognize their fiberglass pieces (Quality) by the burgendy gel coat they use. ANy more questions email me
Tom
BTW I can send you pics of my hood on my 67------------------
67 Mustang F/B 302 GT-40X FMS engine RPM Air Gap 600 Holley ceramic coated headers T5, cable clutch Flows X Pipe 3.89 9". Clearwater Aqua GT Clone Vintage40 series 16X8 225 front 255/50 rear drag radials 13.25 @ 103mph 88 GT 5 spd new project 77k original miles Red and Silver
IP: Logged |
68 S-code GT
Gearhead Posts: 2212
From: Sayreville, NJ, US
Registered: Mar 2000
|
posted 01-26-2005 12:16 PM
Hey Tom can you email me that number also?Are the hoods wave free for the most part? ------------------
Ed S. 68 S-code FB GT 4spd(now C6)/3.25 PS PDB
68 J-code(now 289) Cp Sprint"B" C4/3L00-9" PDB PS AC
99 F150 XLT Ext/cab, 4X4, 5.4L, 3L55 [This message has been edited by 68 S-code GT (edited 01-26-2005).]
IP: Logged |
Tom G
Gearhead Posts: 561
From: Bethlehem, Pa USA
Registered: Nov 2001
|
posted 01-29-2005 01:00 PM
quote:
Originally posted by 68 S-code GT:
Hey Tom can you email me that number also?Are the hoods wave free for the most part?
Ed you've got mail!
------------------
67 Mustang F/B 302 GT-40X FMS engine RPM Air Gap 650 BG CLAW Edelbrock 100 shot Crane 1.7 rollers ceramic coated headers T5, cable clutch Flows X Pipe 3.89 9". Clearwater Aqua GT Clone Vintage40 series 16X8 225 front 255/50 rear drag radials 13.25 @ 103mph 88 GT 5 spd new project 77k original miles Red and Silver
IP: Logged |
Tom G
Gearhead Posts: 561
From: Bethlehem, Pa USA
Registered: Nov 2001
|
posted 01-29-2005 01:09 PM
quote:
Originally posted by 68 S-code GT:
Hey Tom can you email me that number also?Are the hoods wave free for the most part?
The best I've seen I looked at quite a few including 3 or 4 different suppliers at Carlisle last few years.------------------
67 Mustang F/B 302 GT-40X FMS engine RPM Air Gap 650 BG CLAW Edelbrock 100 shot Crane 1.7 rollers ceramic coated headers T5, cable clutch Flows X Pipe 3.89 9". Clearwater Aqua GT Clone Vintage40 series 16X8 225 front 255/50 rear drag radials 13.25 @ 103mph 88 GT 5 spd new project 77k original miles Red and Silver
IP: Logged |
Rustang
Gearhead Posts: 709
From: Clarion PA
Registered: Nov 2000
|
posted 02-11-2005 10:40 AM
One last attempt before I order a new one! 
IP: Logged |
Tom G
Gearhead Posts: 561
From: Bethlehem, Pa USA
Registered: Nov 2001
|
posted 02-12-2005 09:02 AM
quote:
Originally posted by Rustang:
One last attempt before I order a new one!
Where you orderin from?------------------
67 Mustang F/B 302 GT-40X FMS engine RPM Air Gap 650 BG CLAW Edelbrock 100 shot Crane 1.7 rollers ceramic coated headers T5, cable clutch Flows X Pipe 3.89 9". Clearwater Aqua GT Clone Vintage40 series 16X8 225 front 255/50 rear drag radials 13.25 @ 103mph 88 GT 5 spd new project 77k original miles Red and Silver
IP: Logged |
rustang@home
Journeyman Posts: 76
From: Clarion, PA
Registered: Jan 2004
|
posted 02-13-2005 09:27 PM
I'm thinking of going with VFN
IP: Logged |
Tom G
Gearhead Posts: 561
From: Bethlehem, Pa USA
Registered: Nov 2001
|
posted 02-14-2005 09:12 PM
quote:
Originally posted by rustang@home:
I'm thinking of going with VFN
Which style? Flat or cowl induction or Shelby?
IP: Logged |
rustang@home
Journeyman Posts: 76
From: Clarion, PA
Registered: Jan 2004
|
posted 02-14-2005 09:30 PM
I want to go with the flat pin on, but I want to put my own cowl induction scooop on it
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
