|
Author
|
Topic: Wheels needed
|
ccode67
Gearhead Posts: 1936
From: douglasville,ga,usa
Registered: Mar 2001
|
posted 04-01-2004 08:53 AM
   
I need 2 wheels, chrome or aluminum, ford car/ranger bolt pattern with no more than 3 inch backspacing. 15x6 or 14x6, these are going on a trailer to replace the little 13's that are on it. Anyone have a couple they are willing to sell?
------------------
Stuart
MCA #48902
M&M #1091
67 stang 5 speed, 351W,
Edelbrock Performer RPM package my photo page
IP: Logged |
ToddStyles
Gearhead Posts: 133
From: Memphis, TN USA
Registered: Aug 99
|
posted 04-01-2004 10:22 PM
The used parts lot here locally has some aluminum 14" or 15" ranger/explorer wheels when I was in there last. If you know what you are willing to spend, I can check them out tomorrow or Friday and let you know. Shipping shouldn't be more than $20 for the pair to GA.
Todd.------------------
1965 2+2 GT, A-code 289 w/351 heads, Autolite 4100 on a C9OX intake. T-5, 9" Versailles w/4.11 t-lock. [This message has been edited by ToddStyles (edited 04-01-2004).]
IP: Logged |
ccode67
Gearhead Posts: 1936
From: douglasville,ga,usa
Registered: Mar 2001
|
posted 04-02-2004 08:12 AM
I think the factory wheels have more backspacing than I can use, can't be more than 3 inches.
I can probably find some ranger wheels local to measure, the wheels on my '02 ranger are 15x7 with 4.5 backspace and won't work.
Thanks.------------------
Stuart
MCA #48902
M&M #1091
67 stang 5 speed, 351W,
Edelbrock Performer RPM package my photo page
IP: Logged | |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
