|
Author
|
Topic: 67 mustang headers needed
|
lhsucky24
Journeyman Posts: 3
From: nevada, mo 64772
Registered: Mar 2004
|
posted 03-25-2004 01:14 PM
   
hello all, i have a 67 mustang coupe that i am swaping in a c6 auto. i need a set of headers to fit this with 302. any help would be appriciated. either some for sale or part numbers for ones i can buy new. thanks a bunch.
IP: Logged |
N266fords
Gearhead Posts: 1086
From: Spokane ,WA USA
Registered: Apr 2003
|
posted 03-26-2004 02:25 AM
Why not a C-4 especially a 70 and newer. if your not worried about racing it the c-6 will be fine but if you are racing it. the c-6 will suck up more power..Bruce
IP: Logged |
lhsucky24
Journeyman Posts: 3
From: nevada, mo 64772
Registered: Mar 2004
|
posted 03-26-2004 09:06 AM
i should have went with the c4. i agree. i found all this out after install. went with the c6 due to lack of money and i had a rebuild c6 in the garage already. takes a different drive shaft and rear crossmember to. lovin it.
IP: Logged |
Moneymaker
Administrator Posts: 22098
From: Lyons, IL, USA
Registered: May 99
|
posted 03-26-2004 11:16 AM
The Hedman 88300 fit best with a C-6.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
lhsucky24
Journeyman Posts: 3
From: nevada, mo 64772
Registered: Mar 2004
|
posted 03-26-2004 12:55 PM
i looked up the hedman 88300 headers. they say they will only fit c-4? the shorty hedman 88400 says they fit auto. but nothing about if they will fit the c6?
IP: Logged |
Moneymaker
Administrator Posts: 22098
From: Lyons, IL, USA
Registered: May 99
|
posted 03-26-2004 06:19 PM
The Hedman 88300 fit best with a C-6.Tweak here and a tweak there and they will work. I have installed dozens of them on 65-73 cars with 289-302 and C-6. ------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
