heads and intake - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

heads and intake

profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: heads and intake
ss/4104 Journeyman Posts: 16 From: Anthony N.M/ Registered: Aug 2000	posted 11-30-2003 08:08 PM have a set of 289 B heads not ported. screw in studs spring pads cut for 1.550 springs also have a fordmotorsport intake like victor jr ports matched and runners smoothed out.used only a short time IP: Logged
lambone Journeyman Posts: 26 From: Mason, Texas, USA Registered: Sep 2003	posted 12-02-2003 07:27 PM What do you need for the whole lot? IP: Logged
ss/4104 Journeyman Posts: 16 From: Anthony N.M/ Registered: Aug 2000	posted 12-02-2003 09:36 PM how does $400.00 plus frieght sound? let me know if still intrested [email protected] IP: Logged
lambone Journeyman Posts: 26 From: Mason, Texas, USA Registered: Sep 2003	posted 12-03-2003 11:14 PM I'm going to look at two small blocks this weekend and I'll let you know after I see them. IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2003, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]
[ Mustangsandmore.com Bookstore] [Tech Articles]