|
Author
|
Topic: Looking for...
|
68F100
Gearhead Posts: 2052
From: Fort Madison, Iowa USA - United We Stand
Registered: Oct 99
|
posted 07-01-2003 10:29 PM
   
Time, money, and space to finish my truck  Seriously though, I'm in the market for a Holley 4v carb either usable, or good rebuildable. Something that will work on a 302 (will be overbored somewhat)w/ a Comp 270H c4 3:50 gears and 4,000lbs+ truck.
I'm looking for a good used aluminum intake also to go with the carb. If it matters, the only goodies the truck is going to have is Power front discs. I'm thinking of just rebuilding what I have right now, seeing as how the truck needs some major suspension/brake upgrades before I get too wild with the motor.
IP: Logged |
BLstangin
Gearhead Posts: 304
From: South Central MN
Registered: Apr 2002
|
posted 07-01-2003 10:40 PM
I have a edelbrock performer intake for a 302 if you are interested. E-mail me for details if you are interested. My e-mail is [email protected]. Brandon.------------------
1970 coupe restored with the help of my dad. 302 with 600 holley, aluminum intake, headers, pertonix ignitor 2 with matched coil, lakewood bellhousing, 4-speed toploader, and 2.79 open 8" rear. Soon to be 9" 3.50 trac-lok
1986 f-150, 5.0, factory towing package with original c-6 trans
IP: Logged |
Tbird
Journeyman Posts: 79
From: USA
Registered: May 2003
|
posted 07-02-2003 07:38 AM
I've got a couple Holley 1850's that I recently rebuilt and set on the shelf.One is a 1850-4 with standard side hung bowls and another is -3 (I believe) with center hung bowls. Take $100 for either plus shipping.
IP: Logged |
bibbs68
Gearhead Posts: 1015
From: Jackson, TN
Registered: Sep 2000
|
posted 07-02-2003 01:54 PM
68F100, do you happen to have an aluminum 2bbl intake? I am thinking of replacing my alluminum 4bbl intake and carb.The intake I have is an Edelbrock Performer and the carb is a Holley 4bbl 600cfm 1850s(the shiny version). I have had it on my car for about 2 years and it works fine. I just think it is too much for my stock engine and have an original Autolite 2100 to put on it. ------------------
Jeremy
'68 Coupe
M&M Member #685
MCA Member #49134
Help make the world a better place, drive a Ford and race a slot car! [This message has been edited by bibbs68 (edited 07-02-2003).]
IP: Logged |
capri man
Gearhead Posts: 3144
From: doerun, ga.
Registered: Nov 2000
|
posted 07-02-2003 09:43 PM
dang 68, i just sold a torquer 289 intake today for $50------------------
mike r
racing is real
everything else is just a game.
81 capri-7.51 @89mph 1/8
1.54 60 ft.
http://prestage.com/site/site_display.asp?SiteID=141
IP: Logged |
Tommy
Journeyman Posts: 8
From: loretto,tn 38469
Registered: May 2003
|
posted 07-02-2003 10:57 PM
I have a new,still in the box Power Plus Crosswind aluminum intake.Identical to the Edelbrock Air Gap intake.Flow is identical if not better than the air gap.Paid over $185.00 a couple months ago and had nearly a months wait before receiving.I will take $140.00 and I will pay for the shipping.The reason for selling is I went with a 351W instead of the 302.My loss ,someones gain.E-mail me if someone is interested at [email protected] THANKS TOMMY
IP: Logged |
68F100
Gearhead Posts: 2052
From: Fort Madison, Iowa USA - United We Stand
Registered: Oct 99
|
posted 07-03-2003 03:24 PM
Thanks guys. Think I might have an intake lined up. I sent you an email BLstangin.Tbird, I'll keep the carbs in mind. Let ya know after the holiday. Bibbs, my 2bbl intake is iron  Were you looking to do a partial trade? Regardless, I'll ask around here to see if anyone has one lying around. Tommy, never heard of that intake before. Is it an off-brand?
IP: Logged |
BLstangin
Gearhead Posts: 304
From: South Central MN
Registered: Apr 2002
|
posted 07-03-2003 07:10 PM
I got your e-mail 68f100. Sent you one back. Talk ot you after the 4th. Later, Brandon.  ------------------
1970 coupe restored with the help of my dad. 302 with 600 holley, aluminum intake, headers, pertonix ignitor 2 with matched coil, lakewood bellhousing, 4-speed toploader, and 2.79 open 8" rear. Soon to be 9" 3.50 trac-lok
1986 f-150, 5.0, factory towing package with original c-6 trans
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
