|
Author
|
Topic: 9 inch
|
terry
Journeyman Posts: 5
From: tempe,az, usa
Registered: Nov 2000
|
posted 05-31-2003 01:46 AM
   
i am needing a 9 inch rear end housing or complete rear for a 68 mustang.i am in phoenix .
IP: Logged |
Ryan Wilke
Gearhead Posts: 1317
From: Stanton, Michigan 49707
Registered: Oct 2000
|
posted 05-31-2003 08:42 AM
WELCOME TO M&M, TERRY !!  My suggestion to you is first go to M&Ms Home page and click on the "Tech" section, then scroll down to the 'Rear Axle' section, then print off the read each of the archived print off Dave Cole's Rear Axle ID information table. Take the list with your local/favorite junkyard and start sniffing around there for a rearend that will fit your ride.... If they don't have what you want, you can ask them to locate you one or you can travel down the road to the next junkyard.... I've got to believe you could locate a nice rearend around the Phoenix area. Just my 2 cents,
Ryan 
IP: Logged |
Tom G
Gearhead Posts: 139
From: Bethlehem, Pa USA
Registered: Nov 2001
|
posted 06-02-2003 04:44 PM
I know it is pretty far but I was at Carlisle this past weekend. I saw a few complete housing from 300 to 500 dollars Some with traclocs some just open. I was lucky enough a few weeks before to get a complete 9" rear for $150 from a local mustang shop. If there are any major swap meets out west,try one of them first. Get your measurements drum to drum spring perch to spring perch first though. They're may be some other length rears for sale that won't fit without mods. Good Luck!------------------
67 Mustang F/B 302 GT-40X aluminum head roller motor 5 speed. Body shop project soon. 03 Focus ZX3 bassani exhaust wings west spoiler (Arrest ME RED)
IP: Logged |
terry
Journeyman Posts: 5
From: tempe,az, usa
Registered: Nov 2000
|
posted 06-04-2003 12:40 AM
thanks for the info guys and i'll keep looking
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
