|
Author
|
Topic: Fox body V-8 solid motor mounts
|
Moneymaker
Administrator Posts: 19751
From: Lyons, IL, USA
Registered: May 99
|
posted 03-19-2003 06:45 PM
   
Best there are! ASP
Easiest to install, light weight and durable.
$75 a pair plus shipping------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Rory McNeil
Gearhead Posts: 1235
From: Surrey, B.C. Canada
Registered: Nov 2000
|
posted 03-20-2003 03:36 AM
Alex, are these one piece per side, or do they use the existing braket that bolts to the block like the Moroso`s? Do they maintain the factory engine height & location?------------------
78 Fairmont 428 4 speed 10.20@130mph
80 Fairmont 302 5 speed 12.8@105mph
85 Mustang NHRA Stocker under construction, 302 5 speed
59 Meteor (Canadian Ford) 2 dr sedan 332, auto
74 F350 ramp truck 390 4spd
IP: Logged |
Moneymaker
Administrator Posts: 19751
From: Lyons, IL, USA
Registered: May 99
|
posted 03-20-2003 06:35 PM
They are one piece Rory and price is per pair. You use nothing from the factory. they bolt from the block to the frame. There is a large stud protruding through the block mounting plate. They lower the engine just under 1/2 inch. Perfect!  ------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
capri man
Gearhead Posts: 3600
From: doerun, ga.
Registered: Nov 2000
|
posted 03-20-2003 07:25 PM
alex, my studs bottom out at the bottom of the slot before the mount contacts the frame. i had to shim it up with body shims. think i might have the wrong ones? they came from summit or jegs and i think they are moroso. thanks------------------
mike r
racing is real
everything else is just a game.
81 capri-7.51 @89mph 1/8
1.54 60 ft.
http://prestage.com/site/site_display.asp?SiteID=141
IP: Logged |
Moneymaker
Administrator Posts: 19751
From: Lyons, IL, USA
Registered: May 99
|
posted 03-20-2003 08:37 PM
Ours work Mike.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Capri
Gearhead Posts: 1219
From: Lyons, ILL, USA
Registered: May 99
|
posted 03-22-2003 07:40 PM
We used to run the Chevroso solid mounts on my car. I had to shorten them about an inch so they would fit properly. These ASP mounts are lighter in weight, and fit like a glove. For anyone wanting a very good set of lightweight steel motor mounts, this is the product for you.------------------
Tony Denysenko
O/SA 3302
86 Mercury Capri
IP: Logged |
SteveLaRiviere
Administrator Posts: 33989
From: Saco, Maine
Registered: May 99
|
posted 04-17-2003 04:08 PM
^
IP: Logged |
Rory McNeil
Gearhead Posts: 1235
From: Surrey, B.C. Canada
Registered: Nov 2000
|
posted 04-18-2003 03:20 AM
I bought a set of these mounts from Alex recently, folks, and he forgot to mention one thing, they even look pretty!! Much nicer looking than what I expected. They look like they are powder coated too.------------------
78 Fairmont 428 4 speed 10.20@130mph
80 Fairmont 302 5 speed 12.8@105mph
85 Mustang NHRA Stocker under construction, 302 5 speed
59 Meteor (Canadian Ford) 2 dr sedan 332, auto
74 F350 ramp truck 390 4spd
IP: Logged |
68DARKHORSE
Gearhead Posts: 378
From: Austin, Tx
Registered: Aug 2002
|
posted 04-18-2003 10:02 AM
Are there any solid mounts for '68? The only ones I've seen are TCPs.
IP: Logged |
capri man
Gearhead Posts: 3600
From: doerun, ga.
Registered: Nov 2000
|
posted 04-18-2003 11:53 AM
alex, save me a pair and i will pick them up in may. thanks------------------
mike r
racing is real
everything else is just a game.
81 capri-7.51 @89mph 1/8
1.54 60 ft.
http://prestage.com/site/site_display.asp?SiteID=141
IP: Logged |
Moneymaker
Administrator Posts: 19751
From: Lyons, IL, USA
Registered: May 99
|
posted 04-18-2003 06:53 PM
We have some solid mounts for a 67-68 SBF that we made ourselves. $50We keep them on hand at all times Mike. ------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Moneymaker
Administrator Posts: 19751
From: Lyons, IL, USA
Registered: May 99
|
posted 05-06-2003 09:16 AM
^------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03
First SS/MA in the TENS!
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Robert K
Gearhead Posts: 514
From: Nashville, TN
Registered: Apr 2000
|
posted 06-04-2003 09:46 AM
Do you have any mounts that will fit a 65 Mustang with a 302 ? I've looked at the TCP motor mounts and they are very nice but $200/pair is a little steep....although I've sure been thinking about it.------------------
67convertible 289/auto
65fastback 302/4sp
IP: Logged |
Moneymaker
Administrator Posts: 19751
From: Lyons, IL, USA
Registered: May 99
|
posted 06-05-2003 09:17 AM
Sorry Robert, but no we don't.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03
First SS/MA in the TENS!
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Moneymaker
Administrator Posts: 19751
From: Lyons, IL, USA
Registered: May 99
|
posted 06-27-2003 12:12 PM
^------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03
First SS/MA in the TENS!
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
SteveLaRiviere
Administrator Posts: 33989
From: Saco, Maine
Registered: May 99
|
posted 07-27-2003 05:11 PM
^
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
