|
Author
|
Topic: Need Part for 351W
|
richardsdd
Journeyman Posts: 5
From: Green Bay, WI, USA
Registered: Jul 2002
|
posted 11-26-2002 08:34 AM
  
Hi all,
I am looking for a small piece of flat bar metal that attaches to the driver's side head. It's about 3-4 inches long by 1/2 inch wide and 1/2 inch thick. It has three holes in it, two to attach to the head and one threaded hole for the P/S pump to bolt into. It fits on a 69 351W.I'm missing the one for my car and need another to set up my belt system correctly. Can anyone help me on my quest? Thanks!
IP: Logged |
Thud
Gearhead Posts: 986
From: Cumming,Ga.,USofA
Registered: Jun 99
|
posted 11-26-2002 08:54 AM
I bought one from Bill Herndon at Charlotte in '99.
http://users.erols.com/ponywarehouse/------------------
"My doctor says I have a malformed public duty gland and a natural deficiency in moral fiber; and that I am, therefore, excused from saving universes." ... Ford Prefect Dwayne M&M Member #18
'94 Lightning #942 of 4007
'70 Mach1
2 '69 Cyclone Spoiler II's (that are for sale)
'65 Galaxie 500 + parts car
IP: Logged |
ccode67
Gearhead Posts: 1219
From: douglasville,ga,usa
Registered: Mar 2001
|
posted 11-26-2002 10:00 AM
I'll look at the stuff I saved from my 69 windsor, I've got all the idler pulleys and most of the brackets, I'll check tonight.------------------
Stuart MCA #48902
M&M #1091
67 stang 5 speed, 351W,
Edelbrock Performer RPM package Artificial Intelligence is no replacement for Natural Stupidity. http://mustangsandmore.50megs.com/ccode67.html
IP: Logged |
ccode67
Gearhead Posts: 1219
From: douglasville,ga,usa
Registered: Mar 2001
|
posted 11-27-2002 07:23 AM
Sorry, that piece I don't have, I have all the bigger pieces, A/C bracket and a couple of large idler pulleys and brackets.
IP: Logged |
rm302 boss
Gearhead Posts: 166
From: Austin Texas
Registered: Dec 2002
|
posted 12-18-2002 10:59 PM
quote:
Originally posted by richardsdd:
Hi all,
I am looking for a small piece of flat bar metal that attaches to the driver's side head. It's about 3-4 inches long by 1/2 inch wide and 1/2 inch thick. It has three holes in it, two to attach to the head and one threaded hole for the P/S pump to bolt into. It fits on a 69 351W.I'm missing the one for my car and need another to set up my belt system correctly. Can anyone help me on my quest? Thanks!
Are you still looking?
Rene ------------------
1970 Boss 302
1990 Taurus SHO
1985 Mustang GT 351W
1995 Land rover Disco
1980 Triumph Spitfire (auto-X car)
IP: Logged |
richardsdd
Journeyman Posts: 5
From: Green Bay, WI, USA
Registered: Jul 2002
|
posted 12-20-2002 04:00 PM
quote:
Originally posted by rm302 boss:
Are you still looking?
Rene
Yes I am.
IP: Logged |
rm302 boss
Gearhead Posts: 166
From: Austin Texas
Registered: Dec 2002
|
posted 12-20-2002 08:24 PM
quote:
Originally posted by richardsdd:
Yes I am.
How describe this thing. I bought one not to long ago and it was the wrong one i needed the one for the alt and got this one. Its 3-4 in long and has a boss on it for a 1/2-7/16 bolt to thread in. This one was cast in this shape. sound like it?
Rene
IP: Logged |
richardsdd
Journeyman Posts: 5
From: Green Bay, WI, USA
Registered: Jul 2002
|
posted 12-21-2002 04:07 PM
If you tell me your email address, I can send you apicture of the part I am looking for. But that does sound similar.Thanks!
IP: Logged |
SteveLaRiviere
Administrator Posts: 28521
From: Saco, Maine
Registered: May 99
|
posted 12-21-2002 04:14 PM
His email address is right under the letter icon in his post.------------------
'70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150 Be sure to remember our sponsors, Mustangs Plus, NPD, and Osborn Reproductions.
IP: Logged |
richardsdd
Journeyman Posts: 5
From: Green Bay, WI, USA
Registered: Jul 2002
|
posted 12-21-2002 04:37 PM
Thanks!
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
