|
Author
|
Topic: 289 hi-po motor or parts wanted
|
shoe
Gearhead Posts: 131
From: midwest
Registered: Feb 2001
|
posted 07-30-2002 10:23 PM
Looking for a late 65 or very early 66 289 hi-po motor, block or parts. Any leads would be appreciated.
IP: Logged |
tonysailor
Journeyman Posts: 22
From: yorktown va
Registered: Aug 2002
|
posted 08-27-2002 06:25 AM
have a hipo block .030, and a harmonic balancelet me know
tony
IP: Logged |
shoe
Gearhead Posts: 131
From: midwest
Registered: Feb 2001
|
posted 08-27-2002 09:20 AM
Tony, I need the casting date by the starter and the date code of the block. Is it bored .30 now or will it take a .30 to clean it up? Any other machine work done to the block? Is the balancer original Ford or service replacement? Thanks
IP: Logged |
Merc Man
Journeyman Posts: 7
From: NJ
Registered: Apr 2002
|
posted 09-02-2002 10:30 PM
I have a set of good Boss 302 rods, wich are the same length and part #, but have better bolts. They are straight and clean. Steve K
IP: Logged |
tonysailor
Journeyman Posts: 22
From: yorktown va
Registered: Aug 2002
|
posted 09-12-2002 08:23 AM
ok, i'll get the numbers. The block is fresh and is .030 over.
The balancer is orginal off an engine
tony
IP: Logged |
tonysailor
Journeyman Posts: 22
From: yorktown va
Registered: Aug 2002
|
posted 09-12-2002 09:18 AM
cast number c 5ae-6015e
6 b16
IP: Logged |
shoe
Gearhead Posts: 131
From: midwest
Registered: Feb 2001
|
posted 09-14-2002 12:12 AM
How much do you want for the 289 hipo block and balancer? What is the part number on the balancer? Do you have any other hipo parts for it?
IP: Logged |