|
Author
|
Topic: Trany Line fittings
|
Bill MacDonald
Journeyman Posts: 21
From: Chatham, Ontario, Canada
Registered: Nov 2000
|
posted 05-02-2002 05:06 PM
   
I'am in need of 2 trany fittings for C4 automatic transmission.The Ford dealer tells me that they are a C9ZZ-7D273-A. I will descrive these fittings: 90 degree, 1/8 pipe thread with a o ring & jam nut on one end & on the other is 5/16 inverted flare so a 5/16 coolant line & nut can be screw into it . There must be some old tranys kicking around with these on them. Thanks Bill ------------------
IP: Logged |
Just Strokin
Gearhead Posts: 217
From: Tuscaloosa, Alabama
Registered: Dec 2001
|
posted 05-03-2002 07:19 AM
Just for everyone's info....the fittings are Straight 1/8" pipe, NOT tapered pipe threads.You can get the 90* fitting from http://www.bulkparts.com the other fitting you will have to rob from an old tranny or have someone send to you. here is a pic of the fitting...NAPA or someone might be able to order weatherhead part number 1437, but I know bulkparts has them. http://www2.dana.com/expert/wc.dll?DSD~dedrawing~00216015~1437~ You always rob these fittings from junk trannies when you spot them.
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
