|
Author
|
Topic: E7TE 5.0 heads
|
Moneymaker
Administrator Posts: 11665
From: Lyons, IL, USA
Registered: May 99
|
posted 02-27-2002 01:03 PM
   
Original heads off of our project P/SA 89 Mustang GT convert. Good condition with Comp Cams springs, retainers, and keepers already installed. 125 lbs on the seat, and good to go for any mild 5.0 streeter with a B-303 type cam, or even OK with a stock one. Car ran 13.40's at 3650 lbs with these heads. $200 + shipping.------------------
Alex Denysenko
Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00, '01, & '02
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Part time secret agent license #0089
US Class Nationals link
IP: Logged |
Stewart
Moderator Posts: 8087
From: Monterey, CA Mustangsandmore Member #437
Registered: Apr 2000
|
posted 02-28-2002 01:49 AM
Have they had any port work done on them, Alex? Have they been touched in any way?Stewart
IP: Logged |
Moneymaker
Administrator Posts: 11665
From: Lyons, IL, USA
Registered: May 99
|
posted 02-28-2002 02:10 AM
Nope! Never touched from new except for installation of Comp springs, keepers, retainers, and new valve seals by me.  ------------------
Alex Denysenko
Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00, '01, & '02
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Part time secret agent license #0089
US Class Nationals link
IP: Logged |
Moneymaker
Administrator Posts: 11665
From: Lyons, IL, USA
Registered: May 99
|
posted 03-06-2002 02:27 PM
TTT------------------
Alex Denysenko
Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00, '01, & '02
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Part time secret agent license #0089
US Class Nationals link
IP: Logged |
74Mav
Journeyman Posts: 15
From: Mason, Ohio
Registered: Nov 2001
|
posted 03-11-2002 11:31 PM
Alex, have these heads sold yet? If not, would the springs on it go good with a z-303 cam?thanks,
Brian
IP: Logged |
Capri
Gearhead Posts: 1163
From: Lyons, ILL, USA
Registered: May 99
|
posted 03-12-2002 08:35 PM
We have not sold the heads as of yet. I have a good set of springs that would go with the z-camshaft Brian. Comp cams springs used of of MM's 289 SS motor. Should be plenty for that camshaft. Thats after removing the inner spring too. I think the spring part # was 999-16Tony
IP: Logged |
74Mav
Journeyman Posts: 15
From: Mason, Ohio
Registered: Nov 2001
|
posted 03-13-2002 01:48 AM
Okay, what am I looking at, price wise, for the heads with valve springs that work with the z-cam. Also, the shipping zipcode is 45065.
IP: Logged |
Capri
Gearhead Posts: 1163
From: Lyons, ILL, USA
Registered: May 99
|
posted 03-15-2002 11:04 AM
Send me an email at [email protected] when you can.Tony.
IP: Logged |
Capri
Gearhead Posts: 1163
From: Lyons, ILL, USA
Registered: May 99
|
posted 03-18-2002 03:04 PM
These heads are "USED" and not fresh. They need nothing, but they are USED. ------------------
Tony Denysenko
O/SA 3302
86 Mercury Capri
IP: Logged |
Moneymaker
Administrator Posts: 11665
From: Lyons, IL, USA
Registered: May 99
|
posted 03-18-2002 03:05 PM
These heads are "USED" and not fresh. They need nothing, but they are USED. ------------------
Alex Denysenko
Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00, '01, & '02
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Part time secret agent license #0089
US Class Nationals link
IP: Logged |
SteveLaRiviere
Administrator Posts: 22431
From: Saco, Maine USA
Registered: May 99
|
posted 04-29-2002 01:04 PM
ttt
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
