** Door shells only, no windows or hardware**
LH side - There is a small dent below the door handle and a small dent in the middle/front portion (outside). On the inside panel, there is only surface rust, no rust throughs. The lower panel and seams all feel good (by tapping with a screw driver - nothing popped through). From looking at the door from the inside with a flashlight, I see no evidence of filler anywhere.
RH side - This one is a little worse, but definately repairable. On the outer shell, there is a small patch of rust bubbles on the front lower corner (By looking inside of the door, I can see filler in this area as well - a small area, but still visible). On the interior side of the door, there are 3 rust throughs - they all are on the front lower corner on both sides of the weather stripping. The seams and lower panel have surface rust only, good shape - screwdriver test passed again, ha, ha.
I have photos of the doors and damaged areas have been circled to show where they are. These are original Pony Doors as mentioned. They are located in Catlin, IL within easy access to I-74. E-mail me at [email protected] if seriously interested please for further information and to request photos.