|
Author
|
Topic: which powervalve for 4100 carb?
|
tminus3
Journeyman Posts: 13
From: Uden, The Netherlands
Registered: Dec 2003
|
posted 11-18-2005 07:42 AM
  
Hi,I recently bought and rebuilt a 1.12" 4100 carb that originally came off a '64 289 Comet.
I noticed the powervalve in the rebuilt kit moves a lot lighter then the one I removed.
Since I learned here that power valves from a Holley fit in a 4100, what would be a good choice for my very mild 289 (performer cam, home ported stock heads, tri-y headers, performer RPM intake, C4 and 3.00 rear end)
IP: Logged |
Jake11
Gearhead Posts: 207
From: Banning,Ca,USA
Registered: Oct 2005
|
posted 11-18-2005 08:51 PM
6.5
IP: Logged |
Moneymaker
Administrator Posts: 28191
From: Lyons, IL, USA
Registered: May 99
|
posted 11-19-2005 02:41 PM
4.5You lost some vaccum with the cam and intake. ------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,'04 &'05
First NHRA & IHRA 289 automatic Superstock Mustang in the TENS 06-99
First SS/MA in the TENS 04-03
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged | |
Mustangsandmore Forums
