|
Author
|
Topic: What coil for DuraSpark II?
|
Hell_Fish
Gearhead Posts: 911
From: Austin, TX.
Registered: May 2002
|
posted 10-27-2005 04:29 PM
   
Whats the best coil for a DuraSpark II system?------------------
Dustin C
"The Mopar Guy!"
56 F-100
Mech. for wifes 69 Mustang coupe 302 with 69 351W heads and Offy 4bbl intake, C4, Granada disc brakes, Mach 1 springs, Boss 302 sway bar, 8" open
65 Plymouth Barracuda
IP: Logged |
SteveLaRiviere
Administrator Posts: 46598
From: Saco, Maine
Registered: May 99
|
posted 10-27-2005 06:32 PM
The stock is even pretty good, 40,000v. if I remember right.------------------
'70 Mustang Mach 1 351C 4V/FMX/3.25 Open
'70 Mustang Convertible 250 I6/3 speed/2.79 Open
'72 Mustang Sprint Hardtop 351C 4V/FMX/4.30 Trac Loc
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
'05 Mercury Sable LS 3.0L DOHC 24V Duratech V6
IP: Logged |
68 Coop
Gearhead Posts: 4040
From: Mesquite, NV. 89027 M&M# 4256
Registered: Oct 2004
|
posted 10-27-2005 07:06 PM
The Flamethrowers are rated at 40,000 for the Pertronix I and 45,000 for the II.
IP: Logged |
427Fastback
Gearhead Posts: 449
From: N.Vancouver.B.C
Registered: Jan 2005
|
posted 10-27-2005 07:23 PM
Personaly I use either the stock one or a MSD Blaster with the Ford terminals on it.------------------
68 Fastback 427MR 4 spd.Deluxe interior,8000 tach,140 speedo,am/fm,tilt.
IP: Logged |
Hell_Fish
Gearhead Posts: 911
From: Austin, TX.
Registered: May 2002
|
posted 10-28-2005 09:36 AM
If using stock, what year should I ask for?------------------
Dustin C
"The Mopar Guy!"
56 F-100
Mech. for wifes 69 Mustang coupe 302 with 69 351W heads and Offy 4bbl intake, C4, Granada disc brakes, Mach 1 springs, Boss 302 sway bar, 8" open
65 Plymouth Barracuda
IP: Logged |
68 Coop
Gearhead Posts: 4040
From: Mesquite, NV. 89027 M&M# 4256
Registered: Oct 2004
|
posted 10-29-2005 12:51 AM
If you go to the Zone, the first question they will ask is what year of car is it. I only see thr Flamethrowers in the NPD catalog.
IP: Logged |
SteveLaRiviere
Administrator Posts: 46598
From: Saco, Maine
Registered: May 99
|
posted 10-29-2005 12:05 PM
quote:
Originally posted by Hell_Fish:
If using stock, what year should I ask for?
Use '75 or '76, that will get you what you want. ------------------
'70 Mustang Mach 1 351C 4V/FMX/3.25 Open
'70 Mustang Convertible 250 I6/3 speed/2.79 Open
'72 Mustang Sprint Hardtop 351C 4V/FMX/4.30 Trac Loc
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
'05 Mercury Sable LS 3.0L DOHC 24V Duratech V6
IP: Logged |
Mustangsandmore Forums
