Flywheel Installation Question - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

'64 1/2 to '73 -- The Classic Mustang

Flywheel Installation Question

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: Flywheel Installation Question
Robert K Gearhead Posts: 691 From: Nashville, TN Registered: Apr 2000	posted 08-20-2005 08:33 PM What's the correct/best type of sealer to use on the flywheel bolts ? This is on my 65 which with a 1978 302 engine. ------------------ 67convertible 289/auto 65fastback 302/4sp IP: Logged
steve'66 Gearhead Posts: 9326 From: Sonoma,CA,USA Registered: Mar 2000	posted 08-20-2005 10:37 PM Flywheel bolts should be sealed with LocTite. Red or Blue, blue is easier to undo later. SteveW IP: Logged
Robert K Gearhead Posts: 691 From: Nashville, TN Registered: Apr 2000	posted 08-20-2005 11:12 PM Should I also use loctite on the clutch plate bolts ? ------------------ 67convertible 289/auto 65fastback 302/4sp IP: Logged
Mike W Gearhead Posts: 131 From: CA Registered: Jul 2003	posted 08-20-2005 05:51 PM I have used non-hardening gasket sealer on the flywheel bolts. I never have used anything on the pressure plate bolts. IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]