|
Author
|
Topic: scattershield help needed + t 10
|
my65
Journeyman Posts: 17
From: Dearborn
Registered: May 2004
|
posted 04-07-2005 07:39 PM
   
I have a scattershield that my t-10 is bolted to, but I don't know what kind it is. Is there anyway to find out? I don't see any numbers on it. It's black and not red like the lakewoods. I want to convert to a t-5 and I would like to know what adapter plate can be used, and if I can use a cable clutch in the future with it. Also, does anyone know of a website to decode a t-10? Thanks for the help.
IP: Logged |
Moneymaker
Administrator Posts: 26513
From: Lyons, IL, USA
Registered: May 99
|
posted 04-07-2005 07:53 PM
There are very few manufacturers of scatter shields.
If it is a hydro formed steel unit it should be a Lakewood or McLeod.
There MUST be a SFI certification stamp on it.
You can trace the manufacturer through the SFI number.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,'04 &'05
First NHRA & IHRA 289 automatic Superstock Mustang in the TENS 06-99
First SS/MA in the TENS 04-03
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Moneymaker
Administrator Posts: 26513
From: Lyons, IL, USA
Registered: May 99
|
posted 04-07-2005 07:55 PM
http://www.nastyz28.com/transid.html------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,'04 &'05
First NHRA & IHRA 289 automatic Superstock Mustang in the TENS 06-99
First SS/MA in the TENS 04-03
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
my65
Journeyman Posts: 17
From: Dearborn
Registered: May 2004
|
posted 04-07-2005 09:04 PM
If I no longer have a sfi sticker on the bell, am I s.o.l. when it comes to iding it? What about the adapter plate for the t5, will it mate up to any scattershield?
IP: Logged |
Moneymaker
Administrator Posts: 26513
From: Lyons, IL, USA
Registered: May 99
|
posted 04-07-2005 10:00 PM
T-5 adapter should mate up to any bell housing with a hour glass FoMoCo style trans bolt pattern.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,'04 &'05
First NHRA & IHRA 289 automatic Superstock Mustang in the TENS 06-99
First SS/MA in the TENS 04-03
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Mustangsandmore Forums
