|
Author
|
Topic: Ring Gear Bolts........Again.
|
69 Sportsroof
Gearhead Posts: 1863
From: Valley, Alabama, USA
Registered: Mar 2002
|
posted 03-17-2005 07:53 PM
   
Well, I ordered the ring gear bolts from ARP and they aren't the right size. The length is correct but the shoulder portion is too large to fit through the hole on the spool. Now, for the past week (ARP's were on back order from everybody) I've been searching like crazy for these bolts. I've sent an email to everyone on ebay that's selling traction lock units or rebuild kits. I got one guy that said he had them but I haven't heard back from him. If anyone knows where I can get a set of ring gear bolts for an 8" traction lock unit, I'd appreciate the help.
IP: Logged |
Moneymaker
Administrator Posts: 25539
From: Lyons, IL, USA
Registered: May 99
|
posted 03-17-2005 07:58 PM
www.randysringandpinion.com------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,'04 &'05
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Moneymaker
Administrator Posts: 25539
From: Lyons, IL, USA
Registered: May 99
|
posted 03-17-2005 08:02 PM
Also, I believe that the bolts from the Mr. Gasket 900A kit will work also.
You obviously do not need the spacer, but if you are in a hurry you can probably get the 900A kit locally at almost any chain parts store.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,'04 &'05
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
69 Sportsroof
Gearhead Posts: 1863
From: Valley, Alabama, USA
Registered: Mar 2002
|
posted 03-17-2005 08:23 PM
Thanks Alex! They're on the way from Randy's and should be here Monday or Tuesday. 10 bolts with washers for just $20 plus shipping. Cant beat that with a stick. I told them you gave me their name so if you need any sponsorship money......   If anyone else needs anything from them, call them up and ask for Mark.
IP: Logged |
Moneymaker
Administrator Posts: 25539
From: Lyons, IL, USA
Registered: May 99
|
posted 03-17-2005 08:28 PM
 ------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,'04 &'05
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
