Heater core Non-Ac - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

'64 1/2 to '73 -- The Classic Mustang

Heater core Non-Ac

profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: Heater core Non-Ac
sodi Gearhead Posts: 181 From: Kenosha Wi. USA Registered: Dec 2002	posted 03-06-2005 09:41 AM Can someone tell me if a 70 Mach NON-AC heater core has 2 stait hose ends or does one of the tubes have a bend in it. I'm redirecting my heater hoses and wondering how many bends will be in the lines. I'm hopeing its the one that has 2 strait lines just inside the firewall and thru to the int. and water pump. Thanks Sodi IP: Logged
SteveLaRiviere Administrator Posts: 42719 From: Saco, Maine Registered: May 99	posted 03-06-2005 06:43 PM No, one of the tubes has a 90 degree bend. ------------------ '70 Mustang Mach 1 351C 4V/FMX/3.25 Open '70 Mustang Convertible 250 I6/3 speed/2.79 Open '72 Mustang Sprint Hardtop 351C 4V/FMX/4.30 Trac Loc '94 F-150 XL 5.8L/E4OD/3.55 Limited Slip IP: Logged
sodi Gearhead Posts: 181 From: Kenosha Wi. USA Registered: Dec 2002	posted 03-06-2005 08:47 PM So ; I will need to get the hose that is pre-bent-preformed to connect from heater core to the intake manifold ? Thats what I undrstand. OR is it the one that goes to the water pump. Thanks sodi IP: Logged
SteveLaRiviere Administrator Posts: 42719 From: Saco, Maine Registered: May 99	posted 03-07-2005 08:17 AM No, you can use standard heater hose. It attaches to the heater box inside the car then just passes through the grommets into the engine compartment. ------------------ '70 Mustang Mach 1 351C 4V/FMX/3.25 Open '70 Mustang Convertible 250 I6/3 speed/2.79 Open '72 Mustang Sprint Hardtop 351C 4V/FMX/4.30 Trac Loc '94 F-150 XL 5.8L/E4OD/3.55 Limited Slip IP: Logged
SteveLaRiviere Administrator Posts: 42719 From: Saco, Maine Registered: May 99	posted 03-07-2005 08:22 AM If I'm correct, the preformed hose you see listed is for the A/C version that uses a heater control valve. ------------------ '70 Mustang Mach 1 351C 4V/FMX/3.25 Open '70 Mustang Convertible 250 I6/3 speed/2.79 Open '72 Mustang Sprint Hardtop 351C 4V/FMX/4.30 Trac Loc '94 F-150 XL 5.8L/E4OD/3.55 Limited Slip IP: Logged
sodi Gearhead Posts: 181 From: Kenosha Wi. USA Registered: Dec 2002	posted 03-10-2005 08:01 PM Thanks Steve IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]