wvcat
Gearhead Posts: 284
From: New Cumberland,WV
Registered: May 2001
|
posted 03-05-2005 10:04 AM
I have ran into a snag with my v8 conversion. The 6 cyl driveshaft has a ujoint that is way too small to mate up with the 9" rear end. I have a 70 driveshaft I can have shortened but I'd like to be able to safely bolt the 6 cyl shaft in there for now. Does anybody make a ujoint that will adapt the driveshaft?
Thanks
John------------------
Thanks
John
(wvcat)
http://www.geocities.com/wvxr7cougar/wvcat_01.html?989286238390
http://mysite.verizon.net/vzeo7ta1/
Thanks
John
(wvcat)
http://www.geocities.com/wvxr7cougar/wvcat_01.html?989286238390
70[/URL]
[URL=http://mysite.verizon.net/vzeo7ta1/XR7[/URL]Restomod...wvcat
66 coupe project...she needs a name!!!
IP: Logged |
65ponycar
Gearhead Posts: 726
From: Dayton, OH
Registered: Jul 2003
|
posted 03-05-2005 10:26 AM
I got my "bastard" U-Joint at NAPA. I needed one for a six cylinder driveshaft / 8" rear end combo so my part number won't be of much help to you, sorry.p.s. you just need to either measure of find the part numbers for both then get measurements at the shop.
IP: Logged |