|
Author
|
Topic: Headers for 351W
|
460-67Stang
Gearhead Posts: 296
From: Idaho, USA
Registered: Feb 2001
|
posted 08-14-2004 10:20 PM
 
Who makes shorty headers for a 351W in a '68 Mustang, with Power Steering?Thanks!
Brian
|
rdinmv
Gearhead Posts: 163
From: orange county CA
Registered: Feb 2004
|
posted 08-14-2004 10:48 PM
I'm pretty sure headman and JBA do but if you want a bitchen header, dougs headers in riverside CA (the real Doug Thorley) makes a 1 3/4 3/4 length try y to fit 351w in 67-70 stangs. I have them and the fit like a glove,perform exellent and will last a lifetime and they dont hang under the car.MY 67 http://htwheelz.smugmug.com
|
sodi
Gearhead Posts: 286
From: Kenosha Wi. USA
Registered: Dec 2002
|
posted 08-15-2004 10:44 PM
How can I get a hold of Doug thorley ??
|
ccode67
Gearhead Posts: 3285
From: douglasville,ga,usa
Registered: Mar 2001
|
posted 08-16-2004 07:21 AM
Try these guys, I have theirs on mine, with z-bar clutch linkage , they fit perfect.www.fordpowertrain.com Ask for Stan, he knows his stuff. ------------------
Stuart
MCA #48902
M&M #1091
67 stang 5 speed, 351W,
Edelbrock Performer RPM package my photo page
|
rdinmv
Gearhead Posts: 163
From: orange county CA
Registered: Feb 2004
|
posted 08-16-2004 11:26 AM
www.dougsheaders.com I think the part is a d-669y or a d-699y
|
460-67Stang
Gearhead Posts: 296
From: Idaho, USA
Registered: Feb 2001
|
posted 08-16-2004 08:15 PM
quote:
Originally posted by ccode67:
Try these guys, I have theirs on mine, with z-bar clutch linkage , they fit perfect.www.fordpowertrain.com Ask for Stan, he knows his stuff.
Thanks Sturart. Nice Stang you have there!
Cheers,
Brian
|
460-67Stang
Gearhead Posts: 296
From: Idaho, USA
Registered: Feb 2001
|
posted 08-16-2004 08:42 PM
quote:
Originally posted by rdinmv:
I'm pretty sure headman and JBA do but if you want a bitchen header, dougs headers in riverside CA (the real Doug Thorley) makes a 1 3/4 3/4 length try y to fit 351w in 67-70 stangs. I have them and the fit like a glove,perform exellent and will last a lifetime and they dont hang under the car.MY 67 http://htwheelz.smugmug.com
Thanks rdinmv. 1 3/4" primarys are what we're looking for (searching for a buddy). The Thorely headers look real nice. Would you have any pics of the headers from the top of your motor and from the bottom...when the car is on a lift?
Thanks!
Brian
|
rdinmv
Gearhead Posts: 163
From: orange county CA
Registered: Feb 2004
|
posted 08-16-2004 10:57 PM
I'll take some more shots, I ruined the ceramic coating on mine as my dist roll pin broke on the fwy one night and I drive 15miles home with the timing severely retarded and when I got home they were glowing red. I also switched to a 69-70 ps hose as it routes under the crossmember so tyhey werent so close to the headers.
|
460-67Stang
Gearhead Posts: 296
From: Idaho, USA
Registered: Feb 2001
|
posted 09-27-2004 11:50 AM
quote:
Originally posted by rdinmv:
I'll take some more shots.....I also switched to a 69-70 ps hose as it routes under the crossmember so tyhey werent so close to the headers.
Did you get a chance to get those additional pictures? My friend is very interested in learning about your setup. Thanks!
Brian
|
460-67Stang
Gearhead Posts: 296
From: Idaho, USA
Registered: Feb 2001
|
posted 09-27-2004 11:55 AM
Hey RDINMV....could you email me off-list?brian at 472ci-67mustang dot com Thanks!
Brian
www.472ci-67mustang.com
|
