|
Author
|
Topic: Intake bolt specs
|
rmousir
Gearhead Posts: 236
From: Amelia, Ohio
Registered: May 2003
|
posted 08-03-2004 07:51 PM
   
Does anyone know what the torque specs are for the bolts on a intake manifold? Any info would be greatly appreciated. Also when I have the intake off is there anything I can do with it to improve it? Thanks. [This message has been edited by rmousir (edited 08-03-2004).]
IP: Logged |
Fastymz
Moderator Posts: 18591
From: Reno Nv USA MEM#1240
Registered: Apr 2001
|
posted 08-03-2004 08:14 PM
Around 25 ft lbs, the best thing you could do to improve it would be replace it with an RPM intake.  ------------------
SCOOP oddly obsessed with big scoops on little Mustangs 65 coupe,351w,C4,Big Boss 429 hood scoop,8" 3.40 TracLoc. My Pics Caution, keep kids and small pets away from the scoop.
IP: Logged |
capri man
Gearhead Posts: 6368
From: doerun, ga.
Registered: Nov 2000
|
posted 08-03-2004 08:31 PM
a big amen scoop. ------------------
mike r
racing is real
everything else is just a game.
81 capri-302-7.33 @92mph 1/8
1.54 60 ft. http://www.angelfire.com/ny5/billswebsite/pg06.html
IP: Logged |
rmousir
Gearhead Posts: 236
From: Amelia, Ohio
Registered: May 2003
|
posted 08-04-2004 07:49 PM
Thanks very much. It is on the list of things to do this weekend.Richard.
IP: Logged |
gmliebau
Gearhead Posts: 279
From: Port St. Lucie, FL
Registered: Jan 2004
|
posted 08-04-2004 08:08 PM
Are you guys talking stock intakes? The aftermarket intakes vary...my Edelbrock torques at 18-22.
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
