DocVoodoo Gearhead Posts: 144 From: Plainfield CT USA Registered: Feb 2003
|
posted 06-24-2004 09:10 PM
Ok geting alot of feed back in the radio. I have a kenwood custom audio along with the CD changer in the trunk. The Amps Are MTX I have 2 of them with a Pre AMP / Equlizer. The speakers are MB Quartz . I get alot of noise from the engine you can hear the whine with the RPM as it goes up and down. Also Some times I will get a Sound Spike that will not alow the music to come through. The main power comes off the battery and is a very think amp gage that goes down to 2 smaler gage amp feeds. I am thinking its the ground since I have them all grounded to one spot in the back . Some times it will play for days with out the Spikes though the whine is always there yea just can't hear it unless your between songs on the CD player
IP: Logged |
adragon8u Gearhead Posts: 4857 From: Oceano, Ca. member# 2895 Registered: Mar 2003
|
posted 06-24-2004 09:42 PM
I think you can get an inline suppressor for them. Basically a hash coil.------------------ "I started with nothing, and I still have most of it left" http://webpages.charter.net/adragon8u/mystang
IP: Logged |