|
Author
|
Topic: Z bars difference
|
shoe
Gearhead Posts: 228
From: midwest
Registered: Feb 2001
|
posted 01-06-2004 11:54 AM
   
Are the 302 Z bars different on a 69 Mustang than a 351W motor? And are 69 351W Z bars different than a 65 Z bar?
IP: Logged |
kcode
Gearhead Posts: 3019
From: alvaton,ky,usa Suburb of Bowling Green, M&M #79, MCA #29208
Registered: Jun 99
|
posted 01-06-2004 04:18 PM
Shoe,
What I find in numerous catalogs is that there is a different part for 69 302-351 equlizer bars. Can't tell you the difference. There is a big difference between a 65 and 69 bar. I do know that for sure. ------------------
Mike Golliver
MCA Gold Card Judge-Modifieds
65 Kcode coupe 347 stroker modified 5-speed MCA Retired
66 convertible-3 dueces and a 5-speed with a 289
89 T-Bird Super coupe
01 Mustang GT Convt
IP: Logged |
68 S-code GT
Gearhead Posts: 2416
From: Sayreville, NJ, US
Registered: Mar 2000
|
posted 01-07-2004 11:36 AM
I guess the diff between the 302 and the 351 is because the 351 is wider and the 65s engine compartment is smaller than the 67-70.65-66 is suppose to have a smaller engine compartment than the 67-70 but I don?t know if the frame rail spacing if different. [This message has been edited by 68 S-code GT (edited 01-07-2004).]
IP: Logged |
ccode67
Gearhead Posts: 2645
From: douglasville,ga,usa
Registered: Mar 2001
|
posted 01-07-2004 01:52 PM
67 289 bar is different from 69 351w bar, different shape and the 69 is about 3/8 inch wider. I had to use a 69 z bar to clear my headers, cut some off the width to make it fit.------------------
Stuart
MCA #48902
M&M #1091
67 stang 5 speed, 351W,
Edelbrock Performer RPM package my photo page
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
