|
Author
|
Topic: 289 A-Code what's it worth???
|
Bakers67Coupe
Journeyman Posts: 96
From: Chandler,AZ,USA
Registered: Oct 2002
|
posted 12-01-2003 12:02 PM
   
I just need an idea on what to ask for this motor. 289 4 bbl 'A' code engine. I was gonna keep it around as a spare but need the stand for the new motor  The motor has everything but the push rods. Needs some machining and a valve job and rings. No Idea of current bore specs. I believe all parts are original. I will probably put an ad in the paper. Here is the web-site with photos:
http://members.cox.net/351w/289.htmlThanks for any advise
------------------
http://members.cox.net/351w/289.html
Deluxe Coupe 289 4v
Fact Air, Front Discs
[This message has been edited by Bakers67Coupe (edited 12-01-2003).] [This message has been edited by Bakers67Coupe (edited 12-01-2003).]
IP: Logged |
SteveLaRiviere
Administrator Posts: 44954
From: Saco, Maine
Registered: May 99
|
posted 12-01-2003 02:35 PM
Around here an engine like that is worth about $300 or thereabouts. {You know your carb is on backwards, right?}------------------
'70 Mustang Mach 1 351C 4V/FMX/3.25 Open
'70 Mustang Convertible 250 I6/3 speed/2.79 Open
'72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Loc
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
IP: Logged |
Bakers67Coupe
Journeyman Posts: 96
From: Chandler,AZ,USA
Registered: Oct 2002
|
posted 12-01-2003 02:55 PM
quote:
{You know your carb is on backwards, right?}[/B]
No wonder it wouldn't start! Thanks(I actually wasn't paying attn)That's about what i was figuring.
IP: Logged |
Mooney
Gearhead Posts: 1943
From: Marietta, Ga
Registered: Oct 2003
|
posted 12-01-2003 04:19 PM
I saw a 289, not even a mustang engine in the local papers go for 550 (at least this was his asking price.) But mind you it was made to K code specs... but if your's is an actual mustang engine.. then hey.. good luck!
IP: Logged |
Mustangsandmore Forums
