|
Author
|
Topic: Will 69 mustang front brakes fit 66 mustang
|
BenDover
Journeyman Posts: 12
From: Netherlands
Registered: Oct 2003
|
posted 10-01-2003 10:46 AM
  
Hi, I was wondering will 69 mustang front brakes fit 66 mustang.If so, should I take it with the spindles and which price should I pay for this?
IP: Logged |
adragon8u
Gearhead Posts: 4857
From: Oceano, Ca. member# 2895
Registered: Mar 2003
|
posted 10-01-2003 05:28 PM
Welcome to M&M Ben? I hope I'm not sticking my foot in my mouth with this Comment, but please tell me your name is Ben, and that you are from Dover.  ------------------
66 coupe
289
C4 auto
90 ranger 2.3
95 Aspire
"someone who knows how will always have a job working for someone who knows why"
http://webpages.charter.net/adragon8u/mystang
IP: Logged |
BenDover
Journeyman Posts: 12
From: Netherlands
Registered: Oct 2003
|
posted 10-02-2003 03:14 AM
HahA, if you use a name like this, you know who has other hobies than cars.
IP: Logged |
PonyDoc
Journeyman Posts: 93
From: Ft. Lauderdale
Registered: Jun 2001
|
posted 10-05-2003 09:55 PM
69 dicsc should be a C8 engineering #. I put them on my 64 1/2. Use the std '74 maverical disc master cyl, 67 front hoses, stock 68 calipers & rotors. No need for tie rods, as they're the same size as 65/6. The smaller bearing also allows the use of Styled Steel wheels.
IP: Logged |
horseballz
Gearhead Posts: 287
From: LasVegas,NV
Registered: Dec 99
|
posted 10-06-2003 03:06 PM
BenDover,
Aahh, a man who shares some of my interests. I also have been known to enjoy working in the back yard. YES, GET THE SPINDLES, splash shields, calipers (to use as cores) and any other mounting/attaching hardware that is availble to you. The calipers from a 69 will not fit on your spindles and the only readily available aftermarket spindles that I've found are for 70 thru 73 which use a larger bearing and larger rotors that require larger wheels.
===============
Gene (horseballz)------------------
'68 coupe
289/3speed out getting ready for paint and new 5.0/T5
'85 F150 Beater
300/Overdrive Stick
Pre-dented&scratched
'02 Ranger 4x4 Edge
'02 Miata [This message has been edited by horseballz (edited 10-06-2003).]
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
