|
Author
|
Topic: Chicago Rawhide trans. seal?
|
68 S-code GT
Gearhead Posts: 973
From: Sayreville, NJ, US
Registered: Mar 2000
|
posted 06-04-2003 10:34 PM
   
Can anybody reference a Chicago Rawhide seal? I bought it for a 67 C4 trans but it looks a bit different. It is seal No. 19807 and is suppose to be the rear seal on the tail shaft. The one that you can see from the outside where the yoke goes into the trans. I called the parts store and they tell me it��s the right one. I emailed CR four times but I get no response.
IP: Logged |
RonnieT
Gearhead Posts: 520
From: Port Allen, La. 70767
Registered: Jun 99
|
posted 06-05-2003 05:53 PM
That part number is for the front pump seal, not the rear seal according to the NAPA web site. The rear seal should be a part #16725------------------
Ronnie
69 mach1 351W-4V engineless at the time!
70 Torino GT 351C-4v with a "shaker"
Mustangs and More Member #23
IP: Logged |
68 S-code GT
Gearhead Posts: 973
From: Sayreville, NJ, US
Registered: Mar 2000
|
posted 06-05-2003 09:45 PM
quote:
Originally posted by RonnieT:
That part number is for the front pump seal, not the rear seal according to the NAPA web site. The rear seal should be a part #16725
I have to go on Napa's site because I also picked up a front seal for the same C4 and a 68 C6. I wonder what I got. These guy are pretty good also.
IP: Logged |
Moneymaker
Administrator Posts: 19514
From: Lyons, IL, USA
Registered: May 99
|
posted 06-05-2003 11:27 PM
16725 is the correct C/R number for the rear seal.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03
First SS/MA in the TENS!
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
68 S-code GT
Gearhead Posts: 973
From: Sayreville, NJ, US
Registered: Mar 2000
|
posted 06-07-2003 05:53 PM
Well it looks like I have 2- C6 rear seals 1-C4 rear seal and a C6 front seal. Maybe he got confused because I remember him running in the back to get a second pump seal. The C4 and the C6 are suppose to have the same front seal aren��t they?
IP: Logged |
RonnieT
Gearhead Posts: 520
From: Port Allen, La. 70767
Registered: Jun 99
|
posted 06-07-2003 08:59 PM
Yes the C-4 and C-6 use the same front pump seal. ------------------
Ronnie
69 mach1 351W-4V engineless at the time!
70 Torino GT 351C-4v with a "shaker"
Mustangs and More Member #23
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
