just rebuilt a c6 need help on install

Brought to you in part by:

Author

Topic: just rebuilt a c6 need help on install

mustang347
Journeyman

Posts: 69
From:
Registered: Feb 2003

posted 04-20-2003 02:15 PM

i have a 68 mustang coupe
going to put 351c behind the c6
i have 8 " rear end

need to know what work on the driveshaft i need to do. and ne extra work

68 S-code GT
Gearhead

Posts: 1175
From: Sayreville, NJ, US
Registered: Mar 2000

posted 04-23-2003 03:16 PM

The drive shaft will have to be shortened and I think you will need a different yoke.

If you plan on installing a 9�� you should do that first or you will have to get the shaft shortened again.

I made that mistake once. I figured I would use an 8�� to get the car on the road while I cleaned up and rebuilt the 9��.

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Ultimate Bulletin Board 5.47d