BLstangin
Gearhead Posts: 116
From: South Central MN
Registered: Apr 2002
|
posted 02-04-2003 06:18 PM
   
Does anyone know where I can get lower control arm bushings that don't squeak? polyurethane ones suposedly do, rubber ones do. I have heard of midolene ones though that are harder like polyurethane ones, but they don't squeak. Anyone else heard of them. Does anyone know where I can get them. Laurel mountain mustang who I highly recommend and used for almost all my restoration parts has them, but they only come in the repo arms, so the only way to get them is to buy the whole arm, and I don't need the whole arm just want the bushings.------------------
1970 coupe restored with the help of my dad. 302 with 600 holley, aluminum intake, headers, pertonix ignitor 2 with matched coil, 4-speed toploader, and 2.79 open 8" rear. Soon to be 9" 3.25 trac-lok
1986 f-150, 5.0, factory towing package with original c-6 trans [This message has been edited by BLstangin (edited 02-04-2003).]
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
