|
Author
|
Topic: Radiator Dimensions
|
AH Guy
Journeyman Posts: 11
From:
Registered: Jul 2002
|
posted 12-30-2002 10:02 AM
  
When someone with a 1966 or earlier Mustang with a V8 gets a chance, could you please give me the exact overall dimensions (ie, top of the cap to bottom of the tank and across from the very edge of the side mounting flanges) and core dimensions of the stock radiator.Thanks
Gary
IP: Logged |
V8 Thumper
Gearhead Posts: 2830
From: Orange, Ca. United States of America
Registered: Dec 2001
|
posted 12-31-2002 03:16 AM
I've got a '65 289 radiator put away in the garage... I'll dig it out Tuesday afternoon and measure it  ------------------
1965 GT coupe, 333ci aluminum headed/solid cammed stroker, four speed, 3.70:1 9" All Blue Oval, no blue bottle
http://mustangsandmore.50megs.com/V8Thumper.html
IP: Logged |
AH Guy
Journeyman Posts: 11
From:
Registered: Jul 2002
|
posted 01-02-2003 11:15 AM
Just moving this to the top again hoping someone could please get me those radiator measurements. This is a busy forum! By the way V8 Thumper, that's an awesome looking ride.Thank you
Gary
[This message has been edited by AH Guy (edited 01-02-2003).]
IP: Logged |
V8 Thumper
Gearhead Posts: 2830
From: Orange, Ca. United States of America
Registered: Dec 2001
|
posted 01-02-2003 09:32 PM
Oops  Here you go: 21 5/8" overall height (cap to bottom tank)
19 3/4" flange to flange horizontally
16 1/2" core height
17 1/4" core width
10 3/8" mounting bolt hole vertical spacing
18 9/16" " " " horizontal spacing Thanks for the compliment  ------------------
1965 GT coupe, 333ci aluminum headed/solid cammed stroker, four speed, 3.70:1 9" All Blue Oval, no blue bottle
http://mustangsandmore.50megs.com/V8Thumper.html
IP: Logged |
AH Guy
Journeyman Posts: 11
From:
Registered: Jul 2002
|
posted 01-03-2003 09:17 AM
Thank you V8 Thumper, I really appreciate you're help.
Gary
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
