68 1/4 window regulator question - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

'64 1/2 to '73 -- The Classic Mustang

68 1/4 window regulator question

profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: 68 1/4 window regulator question
skiwater Journeyman Posts: 19 From: Utah Registered: Nov 2002	posted 12-11-2002 12:29 PM I have done a search and found some info. but not an answer to my specific question. On my 68 the two rubber wheels are not in thier respective tracks (one on the track on the window, one on the track on the inner quarter panel area). The rollers attach with clips. My question is do I try to put the wheels in the tracks then attach them to the regulator or do I attach them to the regulator then try to feed them in to the tracks? I have tried getting them in to the tracks but with no luck. Any help would be appreciated. Thank you. IP: Logged
68 S-code GT Gearhead Posts: 1175 From: Sayreville, NJ, US Registered: Mar 2000	posted 12-12-2002 06:56 AM You��re going to have to loosen up one of the channels from the car. If you don��t have a shop manual, get one. It has much useful little thing like the ��window work. IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2003, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]
[ Mustangsandmore.com Bookstore] [Mustangsandmore.com T-Shirts][Tech Articles]