|
Author
|
Topic: Axle lengths for '70?
|
stang106
Gearhead Posts: 738
From: God's Country!... Port Alberni B.C. Canada
Registered: Jul 2001
|
posted 12-06-2002 05:20 PM
   
Does anybody know what the 9" axle lengths are for a '70, and where are they measured? Also are the 8" 28 spline axles interchangeable?
Thanks,
Dave------------------
'70 ragtop Stang
351W - 13.70 @104.
IP: Logged |
Dad Vishus
Gearhead Posts: 593
From: Moscow, Iowa, USA
Registered: Dec 2001
|
posted 12-06-2002 05:37 PM
I'm sure KV could tell you when he gets power back.I believe the 28 spline axles for an 8 inch will work in a 9 inch, but don't quote me on that. I think we went through that when KV changed out the 8 inch for a 9 inch in his 70 some time back. I do know that the axles from one side to the other are not the same length. ------------------
63 Falcon 377 Cleveland stroker Flying Toilet alchohol injection. 6.19 @ 110 MPH 1/8 mile
2002 Ranger FX4 daily driver
2000 F350 PSD Crew cab dually - Like commuting in a B52!!
98 US Cargo Phantom II 28' [This message has been edited by Dad Vishus (edited 12-06-2002).]
IP: Logged |
TomP
Gearhead Posts: 4876
From: Delta BC Canada
Registered: Dec 99
|
posted 12-08-2002 03:18 PM
the 8" and 9" ones will interchange. The 8" axles are usually skinnier though.They should measure 27 1/4" from end of spline to the wheel flange on the left, and 31-something" (off the top of my head here) on the right side.
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
