Brought to you in part by:
Topic: Slightly higher stall convertor for green dot C-4?
Registered: Sep 2002
posted 11-09-2002 10:59 PM
It appears as the bugs get worked out of the White Stallion I'm coming to the realization I might need a slightly higher stall convertor for the green dot C-4 in my '65. Well... that or better brakes.
I probably only need a couple of hundred rpms. Can I use anything from another FOMOCO product out of a junk yard? Have any of you installed an aftermarket 12" convertor with a slightly higher stall speed than stock?
From: Lyons, IL, USA
Registered: May 99
posted 11-10-2002 01:30 AM
Yes, factory 11 inch from a 64 260 Falcon or Fairlane with a C-4 will give you about 2500 max stall. (if you can find one)
Co-Administrator and Moderator
NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00, '01, & '02
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
The Barry of BarrysGrrl
Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
Contact Us | Mustangsandmore Front Page
Copyright 2003, Steve LaRiviere. All Rights Reserved.
Ultimate Bulletin Board 5.47d