|
Author
|
Topic: Alignment Spec's
|
cobravenom71
Gearhead Posts: 568
From: Kissimee, Fl USA
Registered: Aug 2002
|
posted 11-01-2002 02:40 PM
   
I need the factory front-end alignment specs for these vehicles, if anyones gottem'
1971 429 Mach 1
1973 302 Convertible
1976 460 Torino
Any help is appreciated. Thanx, Kit Sullivan
IP: Logged |
SteveLaRiviere
Administrator Posts: 31026
From: Saco, Maine
Registered: May 99
|
posted 11-01-2002 04:25 PM
I don't know about the Torino, but for your Mustangs:Factory----------------------Preferred
Camber
-0.5 to 1.5 degrees ----- preferred ��0.5 degrees Caster
-2 to +2 degrees ------- preferred +2.00 degrees Toe in
+.38 ------- preferred -.20
------------------
'70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150
IP: Logged |
cobravenom71
Gearhead Posts: 568
From: Kissimee, Fl USA
Registered: Aug 2002
|
posted 11-01-2002 04:52 PM
Hey Steve, thanks for the info. Whats the difference between 'factory' and 'preferred'
Kit
IP: Logged |
SteveLaRiviere
Administrator Posts: 31026
From: Saco, Maine
Registered: May 99
|
posted 11-01-2002 05:00 PM
Factory is what the factory recommends, current for 1971 and bias ply tires. Preferred takes into account radial tires.------------------
'70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150
IP: Logged |
cobravenom71
Gearhead Posts: 568
From: Kissimee, Fl USA
Registered: Aug 2002
|
posted 11-01-2002 05:04 PM
Thats great. one more question. If I use the preferred specs, will the tires look like they are different? I mean, will they lean in or out,or appear different in any way? ------------------
IP: Logged |
SteveLaRiviere
Administrator Posts: 31026
From: Saco, Maine
Registered: May 99
|
posted 11-01-2002 05:09 PM
No.------------------
'70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
