Brought to you in part by:


Shop Eastwood for your Auto Restoration Needs!

  Mustangsandmore Forums
  '64 1/2 to '73 -- The Classic Mustang
  66 6cyl manual to v8 power steering questions

Post New Topic  Post A Reply
profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone! next newest topic | next oldest topic
Author Topic:   66 6cyl manual to v8 power steering questions

Posts: 222
From: New Cumberland,WV
Registered: May 2001

posted 10-21-2002 09:55 PM     Click Here to See the Profile for wvcat   Click Here to Email wvcat     Edit/Delete Message   Reply w/Quote
Hey All,
For those in the know I have a few questions. I am in the gathering of parts stage for the wifes 66 project. From what I understand, I will need to change the steering box and all the steering components to convert to ps. I have already installed 5 lug drums but I will be changing to discs before the car hits the road. If I use granada disc's I think I will need a special tie rod. If I was to use disc's from another stang say from 67/70 would I need a special tie rod? What about steering components? Do granada components fit under a 66 stang? What other cars can I use for donors? As always thanks in advance.
BTW On my 70 cougar the original disc's and steering work great, would the same components fit the 66? (I know the box is different.)

IP: Logged


Posts: 122
From: perry, oh, usa
Registered: May 2002

posted 10-22-2002 07:20 AM     Click Here to See the Profile for senzstang   Click Here to Email senzstang     Edit/Delete Message   Reply w/Quote

The Granada parts will fit your 66. If you are converting to power steering, you will need a special tie rod end. Mustangs Plus sell the correct one. If you are using manual steering, you will need the Granada tie rod end. You can search other threads on this site for more info. Also check out He has a great article about the conversion.


IP: Logged


Posts: 670
From: Ont, Canada
Registered: Mar 2002

posted 10-22-2002 10:47 AM     Click Here to See the Profile for mustangboy     Edit/Delete Message   Reply w/Quote
Just remember if you use the Granada spindles the hubs are bigger(where they fit through the hole) and original style wheels won't fit.I used 69 cougar spindles on my 63 Falcon.

IP: Logged

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2003, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System Click Here to Pay Learn More

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Bookstore] [ T-Shirts][Tech Articles]