4V heads - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

'64 1/2 to '73 -- The Classic Mustang

4V heads

profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: 4V heads
'69PonyRider Journeyman Posts: 99 From: Hawthorne, CA Registered: Sep 2001	posted 10-19-2002 10:02 PM how can you tell the difference between 2 and 4V heads? where are the cast #'s? thank you Aldo IP: Logged
kid vishus Gearhead Posts: 3079 From: middle of NC Registered: Oct 2000	posted 10-19-2002 11:34 PM If you are talking about cleveland heads, in the upper corner next to the valvecover, there will be a raised number, either a 2 or a 4. That is how you tell. If there is no number, either someone ground it off, or they are newer 351m-400 castings and pretty much worthless. IP: Logged
'69PonyRider Journeyman Posts: 99 From: Hawthorne, CA Registered: Sep 2001	posted 10-19-2002 11:36 PM oh yes sorry cleveland heads thank you how can i tell if they are quench or open? IP: Logged
68DARKHORSE Gearhead Posts: 116 From: Registered: Aug 2002	posted 10-20-2002 11:13 AM Open chambers are round like the bore. Closed chambers look like an orange slice. About 1/4 of the chamber is flush with the deck surface. IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2002, Steve LaRiviere

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Where are the M&M Members From?]

[About M&M][Acronym Guide][Calendar of Events][Chat Room][Classified Ads] [Links]
[Members' Photos] [Technical Articles][Ford Parts Number Deciphering
[ Mustangsandmore.com Bookstore] [Advertise on Mustangsandmore.com] [Mustangsandmore.com T-Shirts]