|
Author
|
Topic: Victor Jr on a 351w?
|
Paul Leonard
Gearhead Posts: 108
From: NLR, AR, USA
Registered: May 2000
|
posted 10-01-2002 11:17 PM
   
Is anyone running a Victor jr intake on a 351w? And if so can it be done in a 67 with a turn signal hood? Oh yeah, with a Holley 750 carb, and any air cleaner that might fit! Thanks in advance, Paul
IP: Logged |
ice'68
Gearhead Posts: 127
From: Fresno, CA
Registered: Apr 2002
|
posted 10-01-2002 11:34 PM
Heighth of a Victor Jr. is 5.75"Performer RPM Air-Gap is 5.75 " And the Performer RPM is 4.80" Dunno if this is right, someone plz double-check on this. Edit: I just realized that the Victor Jr. and Air-Gap are the same heighth. Do me a favor Paul, and see if it fits  [This message has been edited by ice'68 (edited 10-02-2002).]
IP: Logged |
mustangzrule
Journeyman Posts: 87
From: Orion, MI
Registered: Sep 2002
|
posted 10-02-2002 09:20 AM
The 67 and 68 are almost identical and my 351W with the Vic Jr will NOT fit under my 68 stock hood. I cannot find a drop base air cleaner that will work with any larger filter than about 1.5 inches (lawnmowers breathe more than that). Not enough air for my 351 converted into a 408W.Any ideas on what to do (except change my intake) are anxiously awaited.
IP: Logged |
ccode67
Gearhead Posts: 1379
From: douglasville,ga,usa
Registered: Mar 2001
|
posted 10-02-2002 09:24 AM
I'm running the Performer RPM with no spacer and a hipo type air cleaner, the hood only clears by about a quarter inch, maybe with a drop base air cleaner but it would still be a tight fit.------------------
Stuart MCA #48902
M&M #1091
67 stang 5 speed, 351W,
Edelbrock Performer RPM package Artificial Intelligence is no replacement for Natural Stupidity. http://mustangsandmore.50megs.com/ccode67.html
IP: Logged |
Paul Leonard
Gearhead Posts: 108
From: NLR, AR, USA
Registered: May 2000
|
posted 10-02-2002 11:20 AM
I've got my car in the shop right now being painted. Engine is out, Ive got a nice pretty crate motor sitting in the Garage waiting for the car. The Victor jr is already in place, and the engine ready to drop in. I guess We will find out soon. Sounds like I will be replacing the Victor Jr before I put the hood on!Anyone got any advice here!
IP: Logged |
Paul Leonard
Gearhead Posts: 108
From: NLR, AR, USA
Registered: May 2000
|
posted 10-02-2002 11:23 AM
I've got my car in the shop right now being painted. Engine is out, Ive got a nice pretty crate motor sitting in the Garage waiting for the car. The Victor jr is already in place, and the engine ready to drop in. I guess We will find out soon. Sounds like I will be replacing the Victor Jr before I put the hood on!Anyone got any advice here!
IP: Logged |
Paul Leonard
Gearhead Posts: 108
From: NLR, AR, USA
Registered: May 2000
|
posted 10-02-2002 11:25 AM
If the Performer RPM Air-Gap is the same hight as the Victor JR. is anyone running the AirGap under a 67 stock hood?
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
