Posts: 63 From: Nashville, TN, USA Registered: Nov 2000
posted 08-11-2002 03:01 PM
How far apart are the holes drilled for the bullet/ talbot style side mirrors. The holes on my doors for my 65 fastback are drilled at 2-1/4 inches apart was this for the bullet style mirrors as the standard look to be over 4" wide. Thanks
Posts: 13252 From: Lyons, IL, USA Registered: May 99
posted 08-12-2002 11:07 AM
I'll measure mine on MM today for you. I don't think that they are more than 2 and 1/4 inches or so. The bracket screws to the door and the mirror then attatches to the bracket with one screw.
------------------ Alex Denysenko Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator
NHRA/IHRA/SRA member NHRA and IHRA SS/LA National Record Holder '00, '01, & '02 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Part time secret agent license #0089 Professional Manwhore The Barry of BarrysGrrl
Posts: 63 From: Nashville, TN, USA Registered: Nov 2000
posted 08-12-2002 02:18 PM
Thanks, the standard mirrors seem to have holes spaced much further and I was thinking of putting some form fo shelby/ bullet mirror on anyway.