|
Author
|
Topic: Harmonic balancer swapping question
|
68stang351
Gearhead Posts: 267
From: Savoy TX, USA
Registered: Mar 2002
|
posted 07-24-2002 10:17 PM
   
Okay, if I get the 69 block, I need to switch the harmonic balancer from the 94 block (4 bolt) with the 69 (3 bolt). I need the late 4 bolt balancer on this 69 block, because of everything I've got already set up on the serpentine setup with the tensioner and the reverse flow pump. I will not have any balance problems doing this will I?From my undestanding, the 351W balance has always been the same, only the 302 balance changed (in 82?). So I want to use the same flywheel and balancer on the 69 that I was using on the 94. ------------------
Hoofbeats are louder than Heartbeats!
68 Coupe, now with a 351W and 5speed.
Now officially dubbed "THE PIT"
New addition: 63 Fairlane 500!!
IP: Logged |
Moneymaker
Administrator Posts: 19751
From: Lyons, IL, USA
Registered: May 99
|
posted 07-24-2002 10:26 PM
You should be ok as they are both 28 oz balance.  ------------------
Alex Denysenko
Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00, '01, & '02
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Part time secret agent license #0089
Professional Manwhore
The Barry of BarrysGrrl
IP: Logged |
68stang351
Gearhead Posts: 267
From: Savoy TX, USA
Registered: Mar 2002
|
posted 07-24-2002 10:31 PM
Thanks Alex, that's just what I wanted to hear. I was just making sure I was right before I went and possibly done something stupid.------------------
Hoofbeats are louder than Heartbeats!
68 Coupe, now with a 351W and 5speed.
Now officially dubbed "THE PIT"
New addition: 63 Fairlane 500!!
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
