|
Author
|
Topic: Fuel inlets swap on a Holley
|
Pierre
Gearhead Posts: 366
From: France
Registered: Apr 2002
|
posted 07-24-2002 08:49 AM
   
While waiting for my 3310 to swim accross the ocean (you, US guys, are so lucky, you can get your stuff overnite at no cost almost, here patience is a mandatory motto !) a friend of mine lent me a Holley 600 double pumper to appease me and to compare performance with the EDEL.The inlets (2) are on the driver side, and I need them on the other side. Looks like you can swap the bowls (the 2 tanks on opposite sides) and this will place inlets on the passenger side. Can I do that easily ?
IP: Logged |
Bob Hopkins
Gearhead Posts: 243
From: BRIDGEPORT NJ USA
Registered: Jan 2001
|
posted 07-24-2002 09:22 AM
NO you cannot the accelarator punp would be on rear bowl,the make duel inlet bowls that you can swap the plug with the fuel inlet,Dominator style carbs have them so you need to find a replacementbowl for dominator style carb.
IP: Logged |
Pierre
Gearhead Posts: 366
From: France
Registered: Apr 2002
|
posted 07-24-2002 09:31 AM
 , I just don't like running a lonnnnggggg fuel line around the distributor, makes me nervous !
IP: Logged |
7DMACH1
Gearhead Posts: 1517
From: PHILA. PA.
Registered: Feb 2001
|
posted 07-24-2002 10:10 AM
You can order a Ford front bowl from Holley or Pony Carbs. It has two inlets on the fron bowl, one one each side. You run your main fuel line on the Drivers sides and then a tube from the front bowl to the rear bowl on the Pas. side. See picture. RAY
 ------------------
RAY, THE WISE A@@ PHILLY GUY!!
CLICK FOR MY PHOTO ALBUM http://community.webshots.com/album/41183413shedxk
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
