|
Author
|
Topic: Will a 71 Mustang front disc's work on a 68
|
68Thunder
Journeyman Posts: 13
From: Ocean Springs, Ms., USA
Registered: May 2002
|
posted 06-22-2002 08:44 PM
   
I found a 71 Mustang Grande in a local salvage yard, will the front disc's work on a 68... Also should I get the power booster too.. Will it bolt up??
IP: Logged |
Fastback68
Gearhead Posts: 1746
From: Sucat, Paranaque, Philippines
Registered: Jul 99
|
posted 06-22-2002 09:04 PM
They sure will but make sure to get the whole lot, incl. the spindles. As for the booster, it can be made to fit at a pinch, but basically it's too big. You should grab it anyway though.
IP: Logged |
Moneymaker
Administrator Posts: 19751
From: Lyons, IL, USA
Registered: May 99
|
posted 06-22-2002 09:36 PM
Uh huh!  Yup, yup, yup.  ------------------
Alex Denysenko
Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00, '01, & '02
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Part time secret agent license #0089
Professional Manwhore
The Barry of BarrysGrrl
IP: Logged |
PonyDoc
Journeyman Posts: 92
From: Ft. Lauderdale
Registered: Jun 2001
|
posted 06-23-2002 02:27 AM
70-73 Mustang same as Granada. Same large bearings, calipers, rotors, etc. use the 74 Mav M cyl w/ discs and 67 disc hoses. You'll also need the tie rod shims from Mustang Steve and everything bolts right up. Use the proportioning valve from the Mustang or get an adjustable one.
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
