|
Author
|
Topic: 4 way flasher problem
|
mustangboy
Gearhead Posts: 670
From: Ont, Canada
Registered: Mar 2002
|
posted 06-20-2002 04:16 PM
  
Got a 66 mustang that had a broken 4 way switch.I got one from a parts car and joined up all the wires(I know there correct because they're colour coded)and the 4 ways work fine but now the signal lights blink extremely fast.Do these cars have two flashers?I found one and tried replacing it with a heavy duty one but it made no difference.What gives?
IP: Logged |
SteveLaRiviere
Administrator Posts: 33988
From: Saco, Maine
Registered: May 99
|
posted 06-20-2002 07:35 PM
They work by sensing heat, so your replacement is probably rated for more current flow than your car puts out.There are two flashers, one for the turn signals, one for the hazards. ------------------
'70 Mustang Mach 1, '72 Mustang Sprint, '94 F-150
MCA Member # 47773
IP: Logged |
mustangboy
Gearhead Posts: 670
From: Ont, Canada
Registered: Mar 2002
|
posted 06-21-2002 05:17 PM
Can anyone tell me where the two flashers are located.I found the one, sort of in the centre area of the dash,where is the other one?I tried listening for the "clicking" with the signals turned on but couldn't find it this way.
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
