Figuring out compression ratio ...........!!! - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

'64 1/2 to '73 -- The Classic Mustang

Figuring out compression ratio ...........!!!

profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: Figuring out compression ratio ...........!!!
Pierre Gearhead Posts: 541 From: Near Paris, France Registered: Apr 2002	posted 06-11-2002 12:25 PM I have a 2M crank in a 302, pistons are flat top with large D cup (Speed Pro forged aluminium, printed "LT-16" on top of piston) to accept 2.02 valves, Heads are 60cc chambers aluminium. I took a wild guess at 9.5/1 Can somoene tell me what my compression ration is or what other infos do I need to give you ? If I wanted to increase it, what is the easiest way about it ? Thanks IP: Logged
fastcomet289 Gearhead Posts: 140 From: ventura ca Registered: Feb 2002	posted 06-11-2002 04:31 PM this site should help you out http://www.greatplainsas.com/icompratio.html ------------------ 1970 mach1 351c 1965 comet 289 IP: Logged
RonnieT Gearhead Posts: 827 From: Port Allen, La. 70767 Registered: Jun 99	posted 06-11-2002 10:10 PM Here's a site that has a good compression ratio calculator on it. You need a lot of information to get the exact compression ratio. http://www.torinocobra.com/Randys_tools.htm ------------------ Ronnie 69 mach1 351W-4V 70 Torino GT 351C-4v with a "shaker" Mustangs and More Member #23 IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]