Author
|
Topic: New Dash Gauges...
|
70 Pony Gearhead Posts: 1783 From: Glenmoore, PA, USA Registered: Jan 2000
|
posted 04-20-2002 04:39 PM
Does anyone make a "Bolt In"..."Pre Fit"..dash cluster for the 70 stang ??? Either digital or analog....saw something on PopHotRod TV about "Dakota" gauges.....(BUT COULDN'T FIND A WEBSITE) Am thinking about something with a new, modern layout that will fit right in to the instrument pod...without a lot of modification and cutting etc..that will have a Speedo, Oil Pressure, Temp, fuel etc etc already installed... Thanks...------------------ EDDIE D Resto Mod '70 Sport Roof Arrest Me Red '02 GT, Torch Red "If I knew I would have lived this long, I would have taken better care of myself !"
IP: Logged |
70SportsRoof Gearhead Posts: 471 From: Mesa, AZ...for now.... Registered: Dec 2001
|
posted 04-20-2002 05:09 PM
Eddie, check out Dakota Digital's website at www.dakotadigital.com they have all you want to know about digital gauges for '69-70's. They cost about $600, you send in your old bezel and they fit new digital gauges for you. You'll also have to replace all your senders, I think. Not exactly cheap, but they do look pretty cool. ------------------ 1970 Deluxe SportsRoof (63B),(2)46 Ford trucks, 47 Ford truck, 57 Ford Fairlane 500 4dr, '72 Olds Vista Cruiser(for sale), '88 Bronco II(for sale)...running out of room, selling some of my projects [This message has been edited by 70SportsRoof (edited 04-20-2002).]
IP: Logged |
mustangs68 Moderator Posts: 16475 From: Hampton,Virginia,USA MCA#39406 M&M #12 Registered: May 99
|
posted 04-20-2002 05:42 PM
Eddie if you want info Mike (K Code) has installed them in Becky's Vert. sam
IP: Logged |
68stang351 Gearhead Posts: 265 From: Savoy TX, USA Registered: Mar 2002
|
posted 04-20-2002 06:54 PM
Dallas Mustang Parts can do this too. I bet someone else actually does it for them, but it can be done through DMP. 1-800-MUSTANG, Kenny is the best one to talk to, everyone else there is late model. ------------------ Hoofbeats are louder than Heartbeats! [This message has been edited by 68stang351 (edited 04-20-2002).]
IP: Logged |
kcode Gearhead Posts: 2435 From: alvaton,ky,usa Suburb of Bowling Green, M&M #79, MCA #29208 Registered: Jun 99
|
posted 04-21-2002 12:01 AM
Mr. D'Amato, The Dakota Digital is a neat set up, I used existing wire in the engine compartment along with their special sending units. Actually they are VDO units. Inside the car will be a mini cpu about 7" x 5" that all the wiring goes to. Then a ribbon connector from the gage panel plugs into the cpu. Trying to find a suitable location is the bitch. Speedometer is electronic so you don't have to worry about the correct gears, it has to be calibrated. Warning lights can be wired in also, its neat.... Mike
IP: Logged |
70 Pony Gearhead Posts: 1783 From: Glenmoore, PA, USA Registered: Jan 2000
|
posted 04-21-2002 03:09 PM
Thanks for the great & helpful info.....Glad I'm not the only one who likes that look... And YO MIKE !!!! What the heck is this "Mister" stuff ??? I feel old enough today...... Respect all your elders, with the exception of me.... I prefer "Hey You !" than Mr D'Amato.....------------------ EDDIE D Resto Mod '70 Sport Roof Arrest Me Red '02 GT, Torch Red "If I knew I would have lived this long, I would have taken better care of myself !"
IP: Logged |
kcode Gearhead Posts: 2435 From: alvaton,ky,usa Suburb of Bowling Green, M&M #79, MCA #29208 Registered: Jun 99
|
posted 04-21-2002 08:43 PM
Eddie, I'm just showing my respect to my elders, even if it only by a couple of years. Just remember you will always be my elder, of course that means I'll always be younger than you I have been paraphrasing you recently, when you made your comment on having your 60 foot times measured with an hour glass instead of seconds. I resemble that remark with the new motor. Mike
IP: Logged |
70 Pony Gearhead Posts: 1783 From: Glenmoore, PA, USA Registered: Jan 2000
|
posted 04-22-2002 04:49 PM
Hey Mike...I got a million more....and about age... Let's say when I was 40 you were 20...I was twice as old as you...but when I'm 80 you'll be 60 and I'll only be 1/4 older than you. WHICH MEANS...YOU ARE CATCHING UP TO ME... Feel free to Plagerize anything I say...although some may get you into a heap of trouble.... ------------------ EDDIE D Resto Mod '70 Sport Roof Arrest Me Red '02 GT, Torch Red "If I knew I would have lived this long, I would have taken better care of myself !"
IP: Logged |
kcode Gearhead Posts: 2435 From: alvaton,ky,usa Suburb of Bowling Green, M&M #79, MCA #29208 Registered: Jun 99
|
posted 04-22-2002 10:42 PM
Eddie, Nice try, but I'll never catch up to you Mike
IP: Logged |