|
Author
|
Topic: Shaker hood scoop?
|
69maverick
Gearhead Posts: 742
From: Thomaston,CT.
Registered: Jan 2001
|
posted 03-24-2002 10:43 PM
   
What would the going price be for a Complete Shaker hood scoop setup be worth? I have seen one at a local bodyshop in the back room
When I asked what it went to he said he thought it went to a 70 Mach 1.
IP: Logged |
Scott (69Mach)
Gearhead Posts: 356
From: Walnut Creek, CA USA
Registered: Jun 99
|
posted 03-25-2002 01:01 PM
Don't know for sure, but I do know original equipment shakers are scarce and expensive. See what he wants for it...
IP: Logged |
SteveLaRiviere
Administrator Posts: 24286
From: Saco, Maine Toys: '70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150
Registered: May 99
|
posted 03-25-2002 01:18 PM
From what I've seen, $1000-1500 is the going rate for nice and complete setups.
IP: Logged |
69maverick
Gearhead Posts: 742
From: Thomaston,CT.
Registered: Jan 2001
|
posted 03-25-2002 07:14 PM
I'm Going to pick it up tomorrow for 200 bucks. He's going to let me bring it home to check it out. I will get some numbers!! This bad boy could be on ebay buy the end of the week!!!!!!!!!!
IP: Logged |
MrWesson22
Gearhead Posts: 685
From: Dacula, GA
Registered: Sep 2000
|
posted 03-25-2002 09:40 PM
You b*stard!  Why can't I ever find deals like that?? I've been wanting a shaker setup for quite a while but can't swing a grand.------------------
Neal
Member #723
[email protected] AIM: MrWesson22 69 Gulfstream Aqua Grande
351C/Toploader 4sp
IP: Logged |
HHuggins
Gearhead Posts: 103
From: Laguna Niguel, CA
Registered: Feb 2001
|
posted 03-25-2002 09:47 PM
I hear you! I was excited to hear someone had found a shaker setup, but I'm less excited now that I know that it is just going to show up on ebay.  HH ------------------
_ _____________________ _ Harley D. Huggins II
Laguna Niguel, CA 1970 Mach I
1998 GT Convertible
www.geocities.com/hh_machi/
IP: Logged |
The Iceman
Gearhead Posts: 1862
From: Shelton, CT
Registered: Jul 2000
|
posted 03-25-2002 10:44 PM
There ya go Jim! easy money  haha  ------------------
CrAzY Dan~
1965 Coupe "BeeBop" 200ci Straight "6"~2.77 3-spd w/Hurst Shifter~Pertronix Elec. Ign.~Flamethrower Coil~Flex-Fan~Clifford 6-2 Header~26" Smithys~3" chrome tips~'85 T-Bird TC buckets~'66 guages
https://mustangsandmore.com//ubb/TheIceman.html July of 2000 pics
http://www.motorcities.com/contents/01GF9250033520.html July of 2001 pics
http://kingroyale.50megs.com/ Feb. 2002 pics!
There's Nothing Wrong With A Little Six In A Classic Mustang! ;)
IP: Logged |
69maverick
Gearhead Posts: 742
From: Thomaston,CT.
Registered: Jan 2001
|
posted 03-26-2002 07:03 PM
Hey Dan did you find someone to do your car? If not I found a place for you! It's right on rte 67 in seymour. This guy does 65 & 66 stangs all the time!As for the E-Bay thing! I can't use it on a grabber hood! And my son don't want it for his 68 C-Special. But I might let it go to a M & M member that would be putting it on there own car? I will have to think about it.
Its in my truck right now! I have to bring it in and check it out and see if its any good? ------------------
Jim B. 70 Maverick Grabber clone 302,c4 auto
Weld drag lites,Holley 600,performer intake,comp cam,MSD ignition,2.5 " pipes Still needs paint!!
IP: Logged |
AKBOSSMAN
Gearhead Posts: 2766
From: WASILLA , AK USA M&M #743 MCA #40857
Registered: Oct 2000
|
posted 03-26-2002 08:12 PM
Yep one just went for over 1500. The fiberglass one look real good . maybe you should look for one of those HH------------------
WAYNE CURTIS
70 GRABBER GREEN BOSS 302No fake scoops here!
01 Sangria Red Focus ZX3
03 Boss 302 (5.0) (waiting on order form)
92 SHELBY 4X4 (K-9 IDITAROD LEAD DOG)
My old '71Torino GT
"If your under control then your not going fast enough" Parnelli Jones
IP: Logged |
69maverick
Gearhead Posts: 742
From: Thomaston,CT.
Registered: Jan 2001
|
posted 03-26-2002 08:35 PM
Ok I have some part #'s C9ZF-9B624C on the rubber gasket and C9ZF-9B634 on the scoop it self! C9ZB-16738? on the chrome hood ring I'm not possitive on the last part of that number the 167 is easy to read the 38 is questionable!! The part that goes on top of the air cleaner does not have a part # on it that I can find? The opening is big! real big! 8-9"long and 5-6"wide like a large oval.It is black and looks like original paint! The bottom is not there! There was one with it but Its all hacked up to fit and it looks like it was a 2V bottom. So tell me what do I have????????
IP: Logged |
The Iceman
Gearhead Posts: 1862
From: Shelton, CT
Registered: Jul 2000
|
posted 03-26-2002 08:45 PM
Jim,
actually YES i did find a guy to do my car, Ted Olenskie in Ansonia (10 minute drive for me), and he did the rear floorpans and rear torque boxes, along with fixing that small portion of my drivers side quarter for $1700.He did great work and the price, well, is the price haha (seems pretty good though for what he had to deal with with my car  haha) The car is going to inspection Friday and HOPEFULLY will be registered Saturday but heres to hoping ------------------
CrAzY Dan~
1965 Coupe "BeeBop" 200ci Straight "6"~2.77 3-spd w/Hurst Shifter~Pertronix Elec. Ign.~Flamethrower Coil~Flex-Fan~Clifford 6-2 Header~26" Smithys~3" chrome tips~'85 T-Bird TC buckets~'66 guages
https://mustangsandmore.com//ubb/TheIceman.html July of 2000 pics
http://www.motorcities.com/contents/01GF9250033520.html July of 2001 pics
http://kingroyale.50megs.com/ Feb. 2002 pics!
There's Nothing Wrong With A Little Six In A Classic Mustang! ;)
IP: Logged |
69maverick
Gearhead Posts: 742
From: Thomaston,CT.
Registered: Jan 2001
|
posted 03-26-2002 08:54 PM
Very cool Dan! I hope it all works out well for you. God knows you have waited long enough!! P.S My Maverick is being painted this week. All the bodywork is done and its in primer! I saw it today. The guy just needs to block it out and paint it!! He say saturday but he said that 2 weeks ago!!
IP: Logged |
The Iceman
Gearhead Posts: 1862
From: Shelton, CT
Registered: Jul 2000
|
posted 03-26-2002 11:53 PM
Jim, "every two weeks" is the common sign of "I do not have ANY idea when Ill be done"
I cant wait to see the Mav!!!!
My bro and I may need some of your "expertise" when he drops in his rebuilt/hopped up 5.0 into HIS stang in late May
have a good one ------------------
CrAzY Dan~
1965 Coupe "BeeBop" 200ci Straight "6"~2.77 3-spd w/Hurst Shifter~Pertronix Elec. Ign.~Flamethrower Coil~Flex-Fan~Clifford 6-2 Header~26" Smithys~3" chrome tips~'85 T-Bird TC buckets~'66 guages
https://mustangsandmore.com//ubb/TheIceman.html July of 2000 pics
http://www.motorcities.com/contents/01GF9250033520.html July of 2001 pics
http://kingroyale.50megs.com/ Feb. 2002 pics!
There's Nothing Wrong With A Little Six In A Classic Mustang! ;)
IP: Logged |
NitroStanggirl
Journeyman Posts: 4
From: Idaho Falls, ID
Registered: Mar 2002
|
posted 03-27-2002 01:18 AM
I know of an original shaker hood scoop complete setup off a 69 Mach I 428CJ or SCJ? It belongs to a buddy of mine. He wants $1100 for it. I held the thing in my hands. It's quite the piece. In beautiful condition. Has the rubber gasket and everything. Blue air cleaner with the original Motorcraft filter in it. I know it's spendy but if someone wants it I can go pick it up today and ship it to ya. Email me [email protected]
IP: Logged |
Fastback68
Gearhead Posts: 874
From: Sucat, Paranaque, Philippines
Registered: Jul 99
|
posted 03-27-2002 08:04 AM
quote:
The car is going to inspection Friday and HOPEFULLY will be registered Saturday
Dan, forgive me if I'm wrong, but your car has been headed for inspection for MONTHS now, hasn't it?
IP: Logged |
The Iceman
Gearhead Posts: 1862
From: Shelton, CT
Registered: Jul 2000
|
posted 03-27-2002 09:57 PM
yeah soooo what
If one thing doesnt go wrong, another is bound to, and unfortunately thats how it has been for me the past few months hahabut HEY, itll be a pretty much brand new car so I cant complain (well not THAT much ) ------------------
CrAzY Dan~
1965 Coupe "BeeBop" 200ci Straight "6"~2.77 3-spd w/Hurst Shifter~Pertronix Elec. Ign.~Flamethrower Coil~Flex-Fan~Clifford 6-2 Header~26" Smithys~3" chrome tips~'85 T-Bird TC buckets~'66 guages
https://mustangsandmore.com//ubb/TheIceman.html July of 2000 pics
http://www.motorcities.com/contents/01GF9250033520.html July of 2001 pics
http://kingroyale.50megs.com/ Feb. 2002 pics!
There's Nothing Wrong With A Little Six In A Classic Mustang! ;)
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
