|
Author
|
Topic: Quick tranny question...
|
bibbs68
Gearhead Posts: 757
From: Jackson, TN
Registered: Sep 2000
|
posted 03-12-2002 05:25 PM
   
I think I already know the answer, but, will an auto tranny from a 6 cyl. bolt up to a 351W or 351C? Don't laugh. I honestly don't know. And that my friends is why I'm not a mechanic and also why I have you guys! 
THNX! Jeremy
IP: Logged |
Hemikiller
Gearhead Posts: 136
From: Clinton, CT
Registered: Feb 2002
|
posted 03-12-2002 06:21 PM
Jeremy:
Physically, yes it will bolt up. May not last very long, but if you're cash strapped, go for it, and be easy on the gas.
IP: Logged |
73 Green Hoss
Journeyman Posts: 22
From: Waxahachie,TX
Registered: Mar 2002
|
posted 03-12-2002 10:02 PM
Yes, Bell housing bolt pattern is the same, but I don't know what you would do in the case of the torque converter. Will the pilot shaft be the same , and would the flywheel to converter be the same, maybe you could opt. for a good c-4 or c-6 instead! Good luck.
IP: Logged |
bibbs68
Gearhead Posts: 757
From: Jackson, TN
Registered: Sep 2000
|
posted 03-13-2002 09:50 AM
Thanks for the help. I had an aquaintance ask me. I told him I had no idea but I would find out.
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
