|
Author
|
Topic: Power Steering Pump
|
MustangRdr68
Gearhead Posts: 385
From: Bensalem, PA
Registered: Jul 2001
|
posted 02-27-2002 04:51 PM
   
hey guys how do i get the PS pump off. i take off the bracket and all other bolts that i see and nuthin. What do i do?Thx Mike ------------------
1968 Mustang Coupe 289
IP: Logged |
bibbs68
Gearhead Posts: 1113
From: Jackson, TN
Registered: Sep 2000
|
posted 02-27-2002 05:03 PM
I'm really beginning to think that installing PS on my car is not going to be easy. 
IP: Logged |
SteveLaRiviere
Administrator Posts: 33988
From: Saco, Maine
Registered: May 99
|
posted 02-27-2002 05:26 PM
They are easy, what are you having a hard time with? Taking the pulley off the pump, or taking the pump off the engine?------------------
'70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open
'72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
'97 Probe GTS 2.5L DOHC
MCA Member # 47773
I once asked a man: "Who art thou, that ye may pass judgment upon others?" Then he added $75 to my fine...
IP: Logged |
MustangRdr68
Gearhead Posts: 385
From: Bensalem, PA
Registered: Jul 2001
|
posted 02-27-2002 06:35 PM
both  ------------------
1968 Mustang Coupe 289
IP: Logged |
SteveLaRiviere
Administrator Posts: 33988
From: Saco, Maine
Registered: May 99
|
posted 02-27-2002 06:58 PM
Well, first disconnect the two lines at the back, remove the pivot bolt and cinch bolt on the front and the pump falls off. Two bolts holds the p/s pump bracket to the water pump.Use a gear puller to pull the pulley, then three bolts removes the bracket from the pump. ------------------
'70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open
'72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
'97 Probe GTS 2.5L DOHC
MCA Member # 47773
I once asked a man: "Who art thou, that ye may pass judgment upon others?" Then he added $75 to my fine...
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
