Export braces from 2 pc. to 1pc.? - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

'64 1/2 to '73 -- The Classic Mustang

Export braces from 2 pc. to 1pc.?

profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: Export braces from 2 pc. to 1pc.?
SundanceKid Gearhead Posts: 853 From: UT Registered: Feb 2001	posted 01-26-2002 02:12 PM I have a two piece export brace setup on my 65 coupe. I have seen the one piece braces that go under the shock mounts and have heard these are better. So I need to remove the old ones by drilling out the spotwelds on the shock towers correct? Are there any tips or advice from those that have done this before? IP: Logged
mellowyellow Gearhead Posts: 5518 From: So. Fl. Registered: Aug 2000	posted 01-26-2002 03:06 PM If you're careful, you can get them off without making holes. Drill into spot weld to weaken it a bit and a sharp chisel. I left them on as they're not THAT noticeable and they're there if I ever sell car and someone wants an original appearance. It does look better without them. IP: Logged
SundanceKid Gearhead Posts: 853 From: UT Registered: Feb 2001	posted 01-28-2002 02:31 AM Again, thanks Mellow for your help. I drilled and removed the old "export stubs" today. Took me a whole 45 minutes to do. IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2003, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[The M&M Gearhead Gear Store]

[Acronyms][Calendar][Chat][Classifieds] [Links] [Members' Pics] [Tech] [ Mustangsandmore.com Bookstore] [Advertise on Mustangsandmore.com] [Mustangsandmore.com T-Shirts]