|
Author
|
Topic: 70 Boss - Rear Sway Bar End Links
|
Doyle
Journeyman Posts: 41
From: Annapolis, Maryland
Registered: Oct 2000
|
posted 12-30-2001 06:18 PM
  
Anybody know where I can get these
(The length of these on the rear are 10")
NPD doesn't have them - has me concerned these will be difficult to find)?
I will call some other places Monday.
IP: Logged |
steve'66
Gearhead Posts: 8351
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 12-31-2001 12:36 AM
Doyle,Can't you make some? Use all-thread and tubing or pipe for the spacers.
SteveW
IP: Logged |
MidLifCrisis
Gearhead Posts: 449
From: Frederick County, MD
Registered: Oct 2001
|
posted 01-01-2002 10:00 AM
Doesn't Ford still have these available? I may be living in the past  , but I was able to get them from Ford about 12 years ago. I think I would look for grade-8 stainless bolts and poly bushings. The trick would be finding the tube that separates the upper and lower bushings. Maybe some 3/8" or 1/2" pipe nipples from a plumber or gas pipe fitter.
You may want to try ADDCO, a company that specializes in sway bars. They may be able to help.
Good Luck Charlie
IP: Logged |
MidLifCrisis
Gearhead Posts: 449
From: Frederick County, MD
Registered: Oct 2001
|
posted 01-26-2002 09:48 PM
Doyle, I just happened to be at Pep-boys tonite wandering down the ailses when I saw a display of different sized end-link kits. The longest they had there was a 6 1/8". They were manufactured by Prothane and all of them came with the red poly bushings. Maybe Pep-boys can order a longer one for you, or you can find Prothane and order the length you need from them. Good luck. Charlie
IP: Logged |
skips69
Gearhead Posts: 333
From: Catlin, IL USA
Registered: Mar 2001
|
posted 01-26-2002 11:21 PM
Mustangs Unlimited is showing them for $29.00 - doesn't say as each or as a pair.
(www.mustangsunlimited.com) Part# F2193.
IP: Logged |
Doyle
Journeyman Posts: 41
From: Annapolis, Maryland
Registered: Oct 2000
|
posted 01-27-2002 06:20 AM
I was able to find them through
Must. Unlimited. At least they told
me they can get them...
Saw some at the local parts store but they were too short.
BTW - I was told by more than one store
that they have been discontinued.
IP: Logged |
SteveLaRiviere
Administrator Posts: 40617
From: Saco, Maine
Registered: May 99
|
posted 01-27-2002 06:08 PM
quote:
Originally posted by Doyle:
I was told by more than one store
that they have been discontinued.
You'll find quite a few parts for your Boss are. Part of the art of owning an older car is parts hunting. ------------------
'70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open
'72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
'97 Probe GTS 2.5L DOHC
MCA Member # 47773
Of all the things I've lost, my mind is what I miss the most.
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
