|
Author
|
Topic: 289 point gaps
|
beachbum
Journeyman Posts: 56
From: Florida
Registered: Oct 2001
|
posted 11-03-2001 02:19 PM
  
I found some conflicting information about 289 point gaps. I have a 1968, and my Haynes repair manual for my Mustang gives .021 gap, 27 degree drell angle but other information I have says .017 gap with 29 degree dwell angle for the 289. Does anyone have the correct information, thank you. [This message has been edited by beachbum (edited 11-03-2001).]
IP: Logged |
7DMACH1
Gearhead Posts: 875
From: PHILA. PA.
Registered: Feb 2001
|
posted 11-03-2001 02:25 PM
I always used 17 and 29. ------------------
RAY . FLY THE FLAG, SHOW THE WORLD WE ARE PROUD AMERICANS!70 MACH 1 351C NOW 408 STROKER 4SPD.
86 MERCURY CAPRI 5.0 RUNS 12.86 @107 1.65 60 ft.
2001 LINCOLN LS V8 1997 MUSTANG
SHOW THE WORLD, LIGHT A CANDLE.
http://www.geocities.com/slariviere/7DMach1.html
IP: Logged |
n2oMike
Gearhead Posts: 876
From: Spencer, WV
Registered: Jan 2001
|
posted 11-03-2001 03:35 PM
Back in the day when my car used the stock distributer, I used 0.017"------------------
Mike Burch
66 mustang real street
302 4-speed 289 heads
10.63 @ 129.3
http://www.geocities.com/carbedstangs/cmml_mburch.html
http://www.fortunecity.com/silverstone/healey/367
IP: Logged |
Harrys'65
Gearhead Posts: 306
From: Saint Paul, MN
Registered: Sep 99
|
posted 11-03-2001 04:41 PM
I use .017 and 29 as well, that is what is in my 65 shop manual.
Harry
IP: Logged |
mustangs68
Moderator Posts: 13896
From: Hampton,Virginia,USA 1968 Fastback & 1995 Vert MCA#39406 M&M #12
Registered: May 99
|
posted 11-03-2001 11:02 PM
same here..
sam
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
